Amaze GO! Level 435 Arrow Clearing Guide

To beat Level 435 in Amaze GO!, tap the outer edge arrows pointing directly off the board before touching the central cluster. Clearing these unobstructed exterior tiles creates open exit channels for the inner, interlocked arrows that would otherwise collide.

Step 1: Strip Unobstructed Border Arrows

Begin by clearing tiles along the extreme perimeter that point into empty space outside the grid.

Tap the top and bottom borders: Identify vertical arrows on the northern and southern edges that aim directly away from the puzzle. These have zero obstacles and exit cleanly.
Clear the side flanks: Locate horizontal arrows on the outermost left and right columns pointing outward. Ensure no corner piece projects across their travel paths before tapping.
Verify corner trajectories: Leave corner tiles in place if their path intersects an adjacent edge piece. Only tap corner arrows that face straight into open space off the grid.

Step 2: Unlock the Interlocking Perimeter

Once the outermost layer is removed, the secondary perimeter exposes arrows that cross at right angles. Releasing an arrow here requires opening its entire exit corridor first.

Arrow Position	Direction	Priority	Requirement
Left vertical column	Facing west	High	Border lane must be clear
Upper ring	Facing east or west	Medium	Requires flanking vertical space
Right vertical column	Facing south	Medium	Requires cleared bottom lane
Lower ring	Facing north	Hold	Requires open upper corridor

Locate the keystone arrow in this ring—the single piece that points toward a tile vacated in Step 1. Tapping this piece frees the line behind it, triggering a sequence where each vacated space permits the next perpendicular arrow to escape.

Step 3: Clear the Central Core

After opening the perimeter lanes, address the remaining cluster at the center of the board:

Target the primary exit arrow: Tap the innermost arrow that aims toward the widest open corridor created in Step 2. This opens the central cavity.
Direct inner arrows through the center: With the core hollowed out, tap inward-facing arrows so they cross the empty center and exit through the opposite cleared borders.
Clear by axis: Focus on resolving all remaining vertical arrows along a single line before switching to horizontal tiles. Clearing one axis at a time prevents new cross-lane deadlocks.

Mistakes That Cause Collisions

Tapping inward arrows early: Inward-facing arrows cannot push past occupied tiles. Leave them untouched until the opposite side of the grid provides an open exit path.
Rapid multi-tapping: Arrow blocks occupy travel space until their trailing edge completely exits the board. Tapping an intersecting tile while another is still in transit causes a collision. Wait for each piece to clear the screen before tapping the next.