To build an efficient electrical network in Arknights: Endfield, group your generators into a central hub, connect them through primary substations, and daisy-chain standard relay pylons along natural terrain corridors to reach your production sites. Modern base optimizations feature automatic wire snapping, transmission coverage spheres, and penalty-free building dismantling with full resource refunds, allowing you to reconfigure transmission paths without stranding production lines.
Structuring the Base Power Grid
Clustering power generators into a centralized zone simplifies output tracking across your Automated Industry Complex (AIC). Scattering individual generators next to separate drills or fabricators creates isolated, fragile power pockets that quickly brown out when demand expands.
Organize your power infrastructure into four distinct roles:
| Grid Role | Component Type | Placement and Sizing Rule |
|---|---|---|
| Core Generation | Thermal / Basic Generators | Cluster near fuel supplies; maintain a 15% to 20% capacity reserve above load. |
| Main Distribution | Primary Substation | Place at the generation hub boundary to anchor outbound transmission feeds. |
| Long-Distance Transit | Standard Relay Pylons | Space at 80% to 90% of maximum connection range along unobstructed paths. |
| Local Terminal Delivery | Area Relay Nodes | Position centrally within machine clusters to power equipment via area-of-effect spheres. |
How to Daisy-Chain Relays Across Outposts
Daisy-chaining relays prevents overlapping wire tangles and maintains a clean travel corridor for vehicles and operators. Follow this sequence when extending power from a central generation plant to an outlying outpost:
- Anchor the root relay: Position a relay at the edge of your power plant and confirm it connects directly to your active substation before extending lines outward.
- Survey the route: Map a transmission path along high-elevation ground, cliff edges, or dedicated transit corridors to keep power lines clear of ground-level logistics lines.
- Space intermediate pylons: Place relay pylons at roughly 80% to 90% of their maximum line distance. Avoiding the absolute maximum tether length ensures subsequent repositioning will not snap the circuit.
- Deploy the terminal relay: At the destination production or mining cluster, set an area relay node so its circular field encompasses your machinery, allowing automatic connections without individual wire runs.
- Verify circuit flow: Check line indicator lights from the root to the terminal node to confirm active current before powering up heavy consumers.
Routing Lines Across Complex Terrain
Talos-II features jagged crags, deep ravines, and uneven topography that can break line-of-sight between relay pylons. Placing power poles along low valley floors risks pathing interference with conveyor belts and exposes infrastructure to patrolling hostiles.
- Anchor relays on cliff edges: Elevating relay pylons on rock outcroppings provides an unobstructed line-of-sight across wide gaps, spanning ravines that would otherwise require multiple ground poles.
- Run parallel infrastructure corridors: Route primary power lines parallel to major conveyor belt highways. Aligning power and logistics arteries simplifies long-term base expansion and visual maintenance.
Troubleshooting Grid Failures and Brownouts
When factory machines lose power, evaluate distribution links before adding more generators:
- Pulsing red relay lights: The machinery on that circuit requires more energy than the single supply line can transfer. Run a parallel relay feed from the main hub to split the electrical load.
- Unpowered machine icons with surplus hub power: A physical gap exists in the daisy chain. Retrace the relay corridor to locate any severed link caused by terrain obstructions or accidental deconstruction.
- Sudden sector brownouts: Crafting machines cycling on simultaneously can exceed total output. Keep a 15% to 20% operational power buffer above baseline factory demand to absorb peak load spikes.
Free Arknights: Endfield Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
24 players commented on this guide.
The tips are practical and easy to follow.
I wish I had read this before upgrading the wrong thing.
I tried this today and it worked better than my old setup.
This helped me understand base building much better.