To beat Level 1107 in Block Out without failing, target the tall central columns immediately and maintain at least two vacant slots in your buffer tray at all times. Level 1107 separates matching colors across staggered, vertical tiers. Transferring exposed tiles into your dock without confirming their matches quickly causes an unrecoverable tray overflow. By excavating deep columns first and routing complete color sets directly to active exit gates, you prevent deadlocks and clear the grid systematically.
Opening Sequence: Target Central Columns First
Opening moves must prioritize tall central columns over accessible edge pairs. Stripping outer edges provides quick clears, but it leaves deep center stacks untouched. Because the core lanes conceal the majority of lower-tier pieces, leaving them for later creates severe bottlenecks when tray capacity is already limited.
Follow this routine at the start of the stage:
- Check exposed pairs: Identify top-layer tiles that can clear in direct succession without occupying holding slots.
- Inspect column depth: Examine the block directly beneath an exposed piece to ensure removing it uncovers a useful match.
- Clear center lanes: Match the top tiles of the tallest vertical stacks first whenever matching counterparts are accessible.
- Hold isolated edge blocks: Leave peripheral blocks in place until their partners are uncovered from the deeper center lanes.
Clearing the central column early unblocks multiple lower tiers at once, creating the board space needed to route mid-game pieces safely.
Buffer Tray Management
The buffer tray serves strictly as a temporary transit dock, not a long-term holding area. Letting unmatched tiles accumulate eliminates your ability to pull blocking pieces away from buried stacks. Only move a non-matching block into the dock if that move immediately reveals a tile that completes an active set.
| Buffer Tray State | Open Slot Threshold | Tactical Risk Level | Required Player Decision |
|---|---|---|---|
| Open Flow | 3+ slots free | Low | Move transitional blocks to excavate buried stacks. |
| Controlled Buffer | Exactly 2 slots free | Moderate | Restrict selections strictly to immediate, guaranteed matches. |
| Critical Bottleneck | Exactly 1 slot free | High | Halt excavation; select only the piece that clears a tray slot. |
| Terminal Deadlock | 0 slots free | Failure | Tray is completely full; the stage must be restarted. |
Mid-Stage Color Routing
Once the central columns are partially cleared, focus on clearing one color family at a time rather than scattering selections across the board. Commit to the dominant color with the highest number of visible pieces across active columns.
Routing matching sets of a single color through an exit gate clears grid tiles and empties dock slots in rapid succession. This creates open lanes that let you view bottom-tier pieces without guessing. When deciding between two viable color sets, always prioritize the sequence that reduces the tallest remaining column.
Endgame Clean-Up
Endgame failures occur when rapid tapping fills the dock just before the final matches resolve. Treat the final ten blocks as a strictly calculated sequence:
- Count remaining tiles: Verify total visible pieces against the remaining color requirements.
- Identify blocking tiles: Pinpoint any single piece covering the final tile of a needed set.
- Check tray headroom: Ensure the number of mismatched pieces you must hold is lower than your free tray slots.
- Resolve the sequence: Move the blocking piece into the dock, route the completed color through the gate, and collapse the final tiles.
Free Block Out Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
150 players commented on this guide.
I tried this today and it worked better than my old setup.
Can you add more details about strategy in a future update?
The explanation is clear, especially for beginners.
This helped me understand strategy much better.