To clear Level 1179 in Block Out, peel the unobstructed perimeter blocks pointing outward before tapping internal clusters, while maintaining at least two empty slots in your bottom tray. Tapping interior tiles too early traps mismatched pieces in your dock, triggering an unavoidable loss when the seven-slot capacity fills up.
Board Layout and Exit Path Hazards
Level 1179 arranges its primary hazards around tightly clustered central interlocks surrounded by multi-directional perimeter barriers. Exterior blocks point outward along the grid edges. In contrast, interior blocks feature perpendicular directional arrows that remain fully blocked until outer tiles clear the board.
Before tapping any piece, trace its exit trajectory directly from the arrow tip to the edge of the screen:
- An exposed block cannot move if its outbound path crosses the corner boundary of an adjacent tile.
- Straight-line exterior paths along the top and bottom edges offer the widest exit lanes and should be cleared first.
- Removing foreground blocks alters the clearance for underlying tiles, opening launch windows for diagonal and side-exiting pieces.
Step-by-Step Clearing Sequence
Dismantling Level 1179 in phases keeps your dock clear and prevents directional collisions between moving blocks.
- Clear the Outer Perimeter: Target exterior blocks with directional arrows facing away from the center. Focus on matching pairs or full triplets that leave the board immediately rather than lingering in the tray.
- Remove Intermediate Keypins: Once the outer frame is open, target side-facing blocks wedging the central mass. Prioritize pulling pieces that directly expose a third matching piece trapped underneath. If a move sends an incomplete set to the tray, ensure the subsequent tap frees its final match.
- Dissolve the Central Core: After removing intermediate anchors, the interior collapses into dense clusters of identical colors. Tap these remaining blocks in synchronized triplets to cycle them out of the tray instantly.
Tray Buffer Management
The bottom tray has a seven-slot limit. Pulling dormant blocks without visible matches quickly limits your options and locks the board.
| Buffer Slots Filled | Safety Status | Recommended Action |
|---|---|---|
| 0–3 Slots | Optimal | Target keypin blocks that unlock buried layers or expose missing colors. |
| 4–5 Slots | Caution | Halt exploratory taps; select only blocks that complete an active triplet. |
| 6 Slots | Critical Danger | Tap exclusively the exact finishing tile of an active set to avoid a loss. |
Avoid storing partial sets on the tray. If two matching blocks sit on the wings while the third remains buried under multiple layers, leave the exposed pair on the board as temporary physical storage until the third tile is accessible.
Pre-Tap Checklist
Run through these checks before committing to any move on Level 1179:
- Confirm that the target block has an unobstructed path to the grid edge without corner clipping.
- Verify that tapping the block immediately completes a set or reveals the final piece of an active set.
- Ensure that the bottom tray will retain at least two vacant slots after the move finishes resolving.
Free Block Out Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
88 players commented on this guide.
Good guide for Block Out players. The updates part was useful.
The tips are practical and easy to follow.
This saved me time in the early game.
The explanation is clear, especially for beginners.