Colony Flow! Level 1207 Hard Walkthrough Strategy Guide

To clear Level 1207 (Hard) in Colony Flow!, your immediate priority is removing the central color-coded obstacle blocks. Clearing the middle of the board early creates open routing lanes, prevents line gridlock, and allows you to connect the remaining colored pairs without crossing paths or trapping nodes in corners.

Step-by-Step Level 1207 Execution Order

Follow this priority sequence to clear the grid efficiently:

1. Target the Central Blocks First: Clear the middle obstacle configuration immediately. Removing these blocks opens up diagonal paths across the center and splits the board into clear quadrants. Leaving the center blocked forces lines to wind around the perimeter, which leads to intersecting paths.
2. Solve Restrictive Corner Pairs Next: Locate color nodes positioned in corners or tight geometry. Route these restrictive pairs before filling the surrounding grid so longer paths do not isolate them.
3. Route Long Lines Around the Perimeter: Take the paths that require the most grid space and run them along the outermost edges of the board. This protects interior real estate for remaining connections.
4. Connect Remaining Colors Through the Hub: Use the newly cleared central space to run direct, short lines for the remaining color anchors.

Managing Path Geometry and Efficiency

• Minimize Stair-Stepping: Keep every path as straight and direct as possible. Unnecessary turns waste board real estate and risk blocking exit nodes.
• Trace Complete Paths Before Moving: Because intersecting paths are the main failure condition in Colony Flow!, visually trace the full connection from start to end before drawing your line.
• Use the Reset Function: If lines become tangled or trap an open color pair, reset the board to re-evaluate the primary layout rather than spending moves on wide detours.