Colony Flow! Level 950 Walkthrough Guide

To clear Level 950 in Colony Flow!, clear the outer perimeter of the grid before attempting any central connections. Connecting central color paths too early splits the grid, trapping edge and corner colors without viable paths to their destinations. Working from the outside inward preserves open buffer spaces and prevents line intersections.

Step 1: Secure Corner and Perimeter Lines

Start by identifying the color cubes located along the outer edges and extreme corners of the grid. Because these positions offer the fewest routing options, they create immediate failure points if left for late in the puzzle.

• Clear corner pairs first: Connect any corner cubes along the outer rim of the board so they do not get cut off by internal routes.
• Hug the outer edge: Route long perimeter lines directly along the outermost wall rather than cutting across empty grid space.
• Preserve central lanes: Leave all central grid cells empty while establishing your initial perimeter connections.

Step 2: Route Distant Colors Through Central Bottlenecks

Once the perimeter paths are established, address the color pairs positioned farthest from each other across the central grid. The center of Level 950 acts as a bottleneck where multiple routes must cross tight corridors.

1. Identify the longest paths: Find the two color pairs requiring the greatest distance to connect.
2. Use curves over straight lines: Snake your lines using "S-curves" or "U-turns" through central cells instead of drawing straight paths that divide the board.
3. Leave buffer tiles open: Maintain at least one empty color-neutral tile adjacent to unfinished lines to allow routing flexibility for remaining colors.
4. Redraw as needed: Tap and reset any line that traps remaining open cells, as rerouting an established line around the outer edge is often necessary to clear central traffic.

Step 3: Complete Final Connections and Board Cleanup

After resolving the primary central lines, use the remaining open space to complete short-distance connections.

• Check for intersecting paths: Ensure no planned route crosses an active line, which immediately invalidates the move.
• Verify isolated pockets: Confirm that placing a final path does not wall off an unconnected color pair from its destination.
• Finish short lines last: Connect adjacent color pairs once all major routes are safely locked in place.