Kingshot Aiming Guide: Ricochet Angles and Trajectory Controls

To clear puzzle stages with shielded targets in Kingshot, aim your projectiles at static environmental walls so the angle of reflection mirrors your launch angle into the target's exposed hitbox. Adjusting launch velocity and aiming toward the flat centers of map obstacles prevents shots from veering off course.

Calculating Ricochet Angles

When targets sit behind cover without a direct line of sight, calculate your shot path using environmental surfaces.

• Line of Reflection: Treat projectiles like beams of light. The angle of incidence (the angle at which the projectile strikes a surface) equals the angle of reflection.
• Surface Materials: Metallic and hard surfaces retain more velocity, enabling longer bounce chains. Softer materials absorb kinetic energy and shorten the rebound distance.
• Angle Selection: Pick a target wall that forms an acute or obtuse angle directly connecting your bounce point to the target's exposed hitbox rather than targeting the enemy directly.

Utilizing Environmental Geometry

Puzzle stages contain Fixed Devices and static blocks that remain in identical positions across level resets. Use these permanent structures as navigation anchors:

1. Identify the nearest static block or wall segment that has an open angle toward your target.
2. Aim for the flat center of the surface rather than its edge to guarantee a predictable bounce path.
3. Use hard corners to split projectile trajectories or wrap shots around complex obstacles.

Choosing Launch Velocity

Match your launch power to the geometry of the stage to maintain control over the trajectory line.

Fixing Aiming and Collision Issues

If a trajectory indicator shows a clear path but the projectile misses, the shot is likely experiencing collision clipping against obstacle hitboxes.

• Aim Off Corner Edges: Firing directly into sharp corners can cause visual line indicators to misalign with the actual projectile hitbox. Aim slightly toward the center of the flat bounce surface to ensure full contact.
• Isolate Shot Variables: When refining a difficult attempt, change only one parameter at a time—either launch angle or launch power. Use the stage restart option to test minor degree adjustments systematically until the angle succeeds.