To beat Level 1309 in Match Factory!, clear visible objective targets from the surface immediately, keep at least three slots open in your collection tray, and only clear non-target items when they directly bury required goals.

Tray Management and Match Rules

Your bottom collection tray holds up to seven items. Filling all seven slots without forming a match causes an immediate stage failure. In Level 1309, dense clutter makes accidental tray overflow the primary failure point.

Maintain tray control with these operational rules:

  • Confirm the full set: Only pick an item if all three matching pieces are visually identified and accessible on the board.
  • Maintain a three-slot buffer: Never leave more than four slots occupied with partial matches. Keep three slots open so you have room to dig for a matching third piece.
  • Resolve active slots immediately: If the tray reaches five or six occupied items, stop digging for stage objectives and match whichever exposed item clears an occupied tray slot.

Excavation Tactics: Targets vs. Filler Items

The board on Level 1309 contains a mix of required mission targets and non-target filler items. Tapping non-target items at random wastes clock time and fills the tray. Clear filler only when doing so directly uncovers buried objectives.

Action TypeBoard ScenarioRecommended ExecutionPrimary Strategic Benefit
Immediate Target ClearTarget items are visible on the top layerTap all three items in quick successionAdvances stage goals while keeping tray slots clear
Structural Filler ClearLarge non-target items sit directly atop goalsMatch the non-target set if all three are freeTriggers physics shifts that expose buried objectives
Edge Clutter IgnoredNon-target objects lie isolated at the edgesLeave untouched for the entire runPreserves clock time and avoids filling the tray
Emergency Tray DumpTray has five or six occupied slotsMatch an exposed item that clears a tray slotRestores the open buffer and prevents a stage loss

Three-Phase Clearance Route

  1. Phase 1: Surface Sweep (Opening 30–40 Seconds)

Check the objective banner at the top of the screen, then clear fully exposed target sets resting on top of the pile. Do not reach for partially covered items during this opening sweep. Clearing surface targets reduces quota counts quickly and creates openings where deeper items can slide into view.

  1. Phase 2: Core Excavation and Settling

Once surface targets are cleared, identify target pieces wedged in the center of the pile. Locate the filler items resting directly on top of them. Clear those specific filler triples to shift the pile's weight and roll buried targets to the surface. Keep the tray at or below four occupied slots throughout this phase.

  1. Phase 3: Endgame Clock Squeeze (Final 45 Seconds)

When the timer drops below 45 seconds, ignore all remaining non-target clutter unless needed to prevent a tray lock. Focus entirely on your remaining objective quotas.

Booster Deployment

Save power-up tools for late-stage clock pressure or heavily congested board states rather than using them early in the run:

  • Vacuum: Use when required objective pieces are scattered or wedged awkwardly across the board. The Vacuum collects targeted goal items directly into the counter, reducing clutter instantly.
  • Freeze: Activate when the timer drops under 45 seconds and remaining objectives are still buried. Pausing the clock gives you time to locate target pieces without timer panic.
  • Fan or Spring: Deploy the Fan to reshuffle the pile when required pieces are completely pinned under debris, or use the Spring to knock away bulky objects obstructing your targets.
Match Factory! icon

Free Match Factory! Codes

Current active codes and how to redeem them.

View Codes
Sarah Williams

Sarah Williams

Sarah specializes in RPG and collection games, explaining team building, character growth, and beginner-friendly ways to avoid expensive early mistakes.