To solve Level 155 in Parking Loop, clear the parking lot from the outside in. Releasing cars directly into the active outer ring requires two strict conditions: an unobstructed forward exit lane and an open gap in the circulating traffic. Because vehicles cannot stop once tapped, you must clear the unblocked perimeter first to open driving corridors for the central grid.
Four-Phase Car Exit Sequence
Level 155 features an interlocking mix of horizontal and vertical vehicles surrounded by a continuous driving loop. Interior cars cannot leave until perimeter anchors and a central cross-parked pivot vehicle vacate their stalls. Follow this staged departure sequence to prevent bumper snags and merge crashes:
| Phase | Target Vehicles | Objective | Merge Priority |
|---|---|---|---|
| 1. Outer Corners | Unblocked exterior cars pointing at the ring | Open the first clearance lanes on the board edges | Wait for wide track gaps |
| 2. Secondary Flanks | Side-facing cars freed by the corner departures | Clear approach corridors leading toward the center | Merge into trailing loop pockets |
| 3. Central Pivot | Cross-parked car blocking perpendicular rows | Unlock trapped vertical and horizontal center stalls | Precise timing; launch into open flow |
| 4. Interior Flush | Deep-bay vehicles and remaining center cars | Empty all remaining stalls onto the circuit | Maintain steady spacing between exits |
- Phase 1: Clear the outer corners. Tap only the exterior vehicles that face directly outward with no parked cars ahead of their bumpers.
- Phase 2: Empty the secondary flanks. With the outer corners gone, launch the adjacent perimeter cars that now have straight, unobstructed runways to the ring.
- Phase 3: Launch the central pivot car. A single cross-parked vehicle in the middle of the grid blocks multiple perpendicular interior stalls. Once the Phase 2 flanks are clear, send this pivot vehicle into the newly opened space.
- Phase 4: Flush the interior lanes. Launch the remaining center vehicles one by one down the vacated central corridors.
Loop Entry Timing and Merge Windows
Every car accelerates out of its stall at a constant speed and merges directly onto the circulating loop. If a car on the continuous track crosses the junction point at the same moment, a collision occurs and forces a stage restart.
- Track the transit delay: Parked cars take a brief moment to travel from their stall to the loop junction.
- Use bumper alignment: Tap your parked car just as the rear bumper of a circulating car clears your exit junction, provided another vehicle is not tailgating directly behind it.
- Let cars merge solo: Never rapid-tap multiple cars at once. Launching several vehicles in quick succession groups them tightly on the track, creating downstream collisions at adjacent entry points.
Clearing Interlocking Center Stalls
Before tapping any vehicle in the center of the board, trace its entire departure path visually to the outer road. In Level 155, parked cars alternate between vertical and horizontal orientations. Even if a vehicle appears open, the front nose or rear bumper of a neighboring perpendicular car may overlap its driving line by a narrow margin. If any part of a neighboring vehicle intrudes on that lane, leave the car parked until that blocking neighbor departs. Working methodically through the four phases guarantees that every interior runway is completely vacant before you initiate a launch.
Free Parking Loop Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
110 players commented on this guide.
This helped me understand strategy much better.
The explanation is clear, especially for beginners.
Good guide for Parking Loop players. The strategy part was useful.
I tried this today and it worked better than my old setup.