To beat Parking Loop Level 179, release the unobstructed perimeter vehicles first, unblock the front tandem cars to free the interior, and time merges into gaps of at least two vehicle lengths. Moving cars on the central loop do not brake for exiting vehicles. Tapping without adequate spacing causes immediate crashes.
Step-by-Step Vehicle Clearance Order
Clearing the lot requires a three-phase approach that systematically opens trapped stalls while keeping traffic density manageable on the central roadway.
| Phase | Target Vehicles | Objective |
|---|---|---|
| Phase 1: Perimeter Bays | Outer edge stalls with direct loop access | Clear exterior lanes and reveal the active loop's travel speed |
| Phase 2: Tandem Blockers | Front-row vehicles blocking interior stalls | Free trapped rear cars without saturating the circulating roadway |
| Phase 3: Interior Core | Trapped rear tandem cars and center stalls | Filter remaining cars into open gaps to complete the stage |
- Empty perimeter stalls: Tap all corner and side vehicles that have direct, unblocked access to the roadway. This removes outer clutter and establishes a predictable rhythm for loop traffic.
- Release front tandem blockers: Target the lead vehicles stacked in tandem spots. Once the lead vehicle clears its bay, the blocked rear car becomes eligible to move.
- Discharge rear tandem vehicles: Launch the rear cars one at a time, timing each tap so the vehicle slots cleanly behind passing traffic.
Merge Timing on the Circulating Loop
Cars moving along the central ring travel at a fixed speed and will T-bone any vehicle that pulls into their path. Because parked vehicles need a brief acceleration window to clear their stalls, you cannot merge when a car is already level with your bay.
- The launch trigger: Tap a parked car the moment the rear bumper of a passing vehicle crosses the stall's junction line. This maximizes the runway behind that vehicle before the next one arrives.
- Minimum safety gap: Ensure the approaching trailing vehicle is at least two full vehicle lengths away from your entry point before launching. If the gap is narrower, hold position.
How to Clear Tandem Stalls Safely
Tandem bays create the highest failure rate in Level 179 because two cars share a single entry lane. Tapping the rear vehicle too early causes it to ram the lead car before reaching the loop.
- Watch the lead vehicle exit: Tap the front car and let it clear the painted stall line entirely.
- Check the roadway behind it:
- If there is no incoming traffic within two car lengths of the lead vehicle, tap the rear car immediately to form a tight, two-car convoy onto the loop.
- If an existing loop car is approaching close behind the lead car, wait in place. Let the moving traffic clear the junction, then release the rear car into the next available two-car window.
Preventing and Clearing Traffic Jams
Rapid, impatient tapping packs the loop with tightly grouped cars, eliminating the empty windows required to release interior stalls.
- Pause to reset: If the ring becomes congested, stop tapping entirely. Allow circulating vehicles three to four seconds to reach the exit gate. Once the loop clears, safe insertion windows will reappear.
- Release upstream first: Prioritize stalls located earlier along the loop's traffic flow. Launching downstream vehicles while an upstream convoy approaches creates blind merge conflicts that frequently cause crashes.
Free Parking Loop Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
84 players commented on this guide.
Can you add more details about strategy in a future update?
This saved me time in the early game.
I tried this today and it worked better than my old setup.
I wish I had read this before upgrading the wrong thing.