To use automated prisoner unloading in Police Chief, park your transport vehicle entirely inside the marked yellow intake zone at Central Prison, engage the handbrake, and open the rear doors. Inmates will untether themselves, exit the vehicle sequentially, and walk toward the booking desk without requiring you to manually escort them.
Drop-Off Sequence
Follow these steps to ensure the automated intake script initiates properly:
- Back into the intake bay: Reverse your transport van or bus into the yellow demarcation box facing the booking gates. Ensure all tires rest completely inside the perimeter and leave roughly two meters of clearance between the rear bumper and any fences or walls.
- Secure the vehicle: Shift the transmission into Park or Neutral, engage the handbrake, and switch off the engine to prevent the vehicle from rolling.
- Open the rear doors: Exit the driver's cab, walk to the rear of the vehicle, and unlatch both cargo doors. A confirmation chime and a HUD counter indicate the unload script has started.
- Step aside: Immediately clear the exit lane. The prisoner pathfinding script uses a narrow navigation mesh at the vehicle steps, and your officer's collision model will block exiting inmates if you stand directly behind the bumper.
- Monitor booking check-ins: Remain in the intake bay until every inmate reaches the booking counter and the vehicle manifest displays zero.
Intake Alignment and Collision Checks
The automated unload script fails if physical alignment or spatial constraints are not met. Use the following conditions to prevent pathfinding errors during transfer:
| Factor | Required Setup | Failure Consequence |
|---|---|---|
| Zone Alignment | All tires positioned within the yellow box | Autonomous unload script does not trigger |
| Transmission | Neutral or Park with handbrake engaged | Vehicle shifts, disrupting inmate exit path |
| Bumper Clearance | Minimum two meters behind the rear doors | Inmates collide with walls and freeze |
| Officer Position | Clear of the rear steps and entry path | Player hitbox halts the AI navigation queue |
Fixing Stalled Inmates
If a prisoner stops moving inside the transport hold, step into the vehicle and interact directly with them to restart their walking objective. If an inmate clips into the vehicle chassis or door frame, shut and reopen the rear cargo doors to reset their collision state.
Payout Verification and Station Logistics
Central Prison processes rewards incrementally rather than in a lump-sum drop-off bonus.
- Per-Inmate Credits: Bounty payouts, experience points, and public trust gains trigger one by one as each suspect checks in with the booking clerk.
- Early Departure Risk: Do not drive out of the yellow intake box while suspects are still crossing the intake yard. Leaving prematurely cancels incomplete handoffs, forfeiting rewards and leaving those prisoners stuck in transit without freeing precinct holding capacity.
- Batch Scheduling: Running transport routes with a full load of four to six suspects maximizes travel efficiency. However, initiate your delivery runs during quiet dispatch lulls so precinct cells do not hit maximum capacity while your transport vehicle is away from the station.
Free Police Chief Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
115 players commented on this guide.
The tips are practical and easy to follow.
This saved me time in the early game.
This guide answered the exact question I had.
Can you add more details about strategy in a future update?