Police Chief Vehicle Pursuit and Arrest Guide

To arrest fleeing suspects in Police Chief, maintain close trailing proximity behind the target vehicle, preserve cruiser health by pacing rather than ramming, and fully pin the vehicle before exiting to initiate custody.

Maintaining Trailing Distance and Visual Sightlines

Fleeing suspects will evade capture if you fall too far behind or lose line-of-sight. To prevent suspects from escaping, prioritize staying directly behind their bumper throughout the pursuit.

• Cornering Control: Avoid over-steering into sharp city turns. Speeding into corners can cause patrol cruisers to slide into walls, fences, or oncoming civilian traffic.
• Camera Management: Keep the camera focused on the fleeing suspect. Switch to a wide-angle camera view in high-density urban areas to spot sudden traffic flow or obstacles ahead.
• Predicting AI Maneuvers: Tap your brakes early when suspects enter alleyways or signal sudden U-turns. AI drivers take sharp turns that can trap fast-moving cruisers behind static geometry.

Managing Vehicle Damage and Collision Physics

Cruiser condition directly impacts your pursuit capabilities. Repeated collisions degrade engine health and tire traction, reducing top speed and handling against high-performance getaway cars.

Rather than aggressive ramming, focus on pacing the suspect by driving parallel or remaining closely behind them. Aggressive impacts often cause patrol vehicles to spin out or get stuck on street geometry. If your cruiser suffers heavy engine or tire damage during a chase, back off from aggressive interception tactics and shift strictly to a trailing strategy to maintain visual contact without destroying your vehicle.

Cornering, Pinning, and Arresting Suspects

Transitioning from driving to an on-foot engagement requires controlled positioning to prevent suspects from fleeing on foot.

1. Box In the Vehicle: When the suspect comes to a halt or crashes, do not exit your cruiser immediately. Position your vehicle to block their path, pinning them against a curb, building, or wall.
2. Equip Tools: Ensure your weapon or required interaction tool is selected before stepping out of the cruiser.
3. Execute Arrest: Exit the vehicle once the target is stationary and trapped, then immediately trigger the interaction to prevent a secondary on-foot chase.

Navigating Environmental Road Hazards

Urban streets contain unpredictable hazards that can disable your cruiser or penalize mission performance:

• Busy Intersections: Avoid high-speed approaches across traffic lines where civilian vehicles fail to yield.
• Construction Obstacles: Poorly marked barriers can disable a cruiser instantly if struck at high speeds.
• Alley Dead-Ends: Slow down when trailing suspects into narrow turns if you are unfamiliar with the map layout.
• Civilian Hazards: Use lights and sirens to clear paths through traffic. Hitting pedestrians or civilian cars causes mission penalties, making vehicle control more important than speed.