Roblox: How to Escape Mr. Yummy’s Supermarket

To escape Mr. Yummy’s Supermarket in Roblox, you must complete a linear obstacle course that requires crossing hazard-filled grocery aisles, surviving direct chases with Mr. Yummy, and clearing low-traction freezer rooms and narrow air ducts before reaching the loading dock getaway.

Surviving Supermarket Hazards

The supermarket floor contains instant-reset hazards, including corrosive green soda spills, scattered carts, and shifting checkout belts. Avoid running straight down main aisles where floor hazards are dense. Instead, route your jumps across shelf edges, display ends, and cash register counters.

When crossing checkout registers, angle your camera downward at roughly 45 degrees. This view helps you track narrow landing hitboxes on cart handles, scanning tables, and cereal boxes without overshooting.

Outrunning and Evading Mr. Yummy

Mr. Yummy moves faster than standard player walking speed down straight paths. When an encounter begins, do not attempt to run in a straight line on open ground. Use the layout to break line of sight and exploit his pathfinding:

• Take sharp turns around aisle ends: Mr. Yummy has a wide turning radius due to his large collision hitbox. Rounding shelf corners tightly creates immediate distance.
• Duck into low shelf openings: The boss cannot fit inside narrow crawlspaces or lower display cutouts, forcing him to take longer perimeter routes.
• Do not bunny-hop on flat floors: Repeatedly jumping across flat surfaces interrupts forward momentum and drains stamina, allowing the pursuer to catch up.
• Rotate your camera to monitor spacing: Turn your camera view backward while holding your forward movement key to track the boss's position without losing travel speed.

Clearing the Freezer and Cold Storage

The walk-in freezer introduces low-friction ice surfaces and overhead hazards. Sliding on iced concrete makes sudden ground turns unreliable, which can push your avatar into floor grates or hanging meat hooks.

1. Stop before entering the ice: Bring your avatar to a complete stop at the room boundary to reset any carried momentum.
2. Watch the ceiling for shadow markers: Icicles drop periodically from above. Wait for falling ice to strike the floor before moving forward.
3. Turn during jumps: Air control is unaffected by floor friction. Jump straight up and redirect your movement mid-air rather than attempting sharp ground turns on ice.
4. Target wooden pallets: Land on flat crate tops and pallets, which provide standard footing and stop surface sliding.

Navigating Air Ducts and Maintenance Vents

Vents restrict your camera to a tighter third-person or forced first-person perspective, reducing peripheral vision.

• Listen for steam releases: Timed steam jets block duct paths. Stand just outside the blast area and proceed only after the hiss sound subsides.
• Time spinning fan blades: Identify the widest gap between fan blades. Step through immediately after a blade passes your position.
• Avoid jumping inside ducts: Jumping in low-clearance vents hits your character's head on the ceiling. This cancels forward velocity and drops you directly into hazards below.

Finishing the Loading Dock Escape

The final stage takes place in the back warehouse and loading dock. This section features stacked pallets, moving forklifts, and an uninterrupted chase sequence leading to the exterior parking lot.

Maintain a straight line along the warehouse shelving. Jump only onto flat, level shipping crates, avoiding tilted boxes with uneven collision surfaces. Once the roll-up warehouse door opens, sprint directly toward the getaway vehicle in the lot. Reserve your final sprint momentum to leap cleanly over the lowered dock edge into the safe zone to complete the escape.