Rotate Rings Level 215 Walkthrough and Alignment Guide

To solve Level 215 in Rotate Rings, you must align the cutouts of three nested rings to form an unbroken exit channel from the center to the outside perimeter. Align the puzzle from the inside out: position the innermost ring first, bridge the channel using the middle ring, and finish by rotating the outer boundary ring.

Step-by-Step Alignment Order

Working from the innermost layer outward ensures you do not obscure your view of internal gaps or accidentally backtrack.

Locate the Center Gap: Identify the exit notch on the innermost ring. Note its orientation relative to the outer perimeter before moving any pieces.
Rotate the Inner Ring: Turn the center ring to point its opening toward your planned exit vector, usually directly toward the top or bottom edge.
Align the Middle Ring: Rotate the intermediate ring until its pass-through slot connects directly with the inner ring's notch. Make sure the opposite side of the middle cutout leads toward an open outer path rather than a solid wall.
Position the Outer Ring: Turn the outermost perimeter ring until its wide release notch matches the interior channel you formed.
Release the Tokens: Once all notches align along the same radial line, the trapped tokens or pins drop through the opening, completing the stage.

Ring Layers and Alignment Hazards

Level 215 features asymmetric cutouts and decoy notches designed to catch pieces in dead ends. Use this breakdown to navigate each layer correctly:

Ring Layer	Role	Alignment Priority	Primary Hazard
Inner Ring	Holds starting tokens	1 (First)	Rotating aimlessly without targeting an outer exit path
Middle Ring	Bridges inner and outer paths	2 (Second)	Falling for dummy notches that dead-end against solid walls
Outer Ring	Final perimeter gate	3 (Final)	Overshooting the final slot with fast swipes

Pay close attention to the middle ring. It contains multiple cutouts, but only one acts as a true bridge between the inner and outer layers. If aligning the middle ring leaves the outer transit blocked, turn the middle ring half a rotation further to access the correct pass-through slot.

Preventing Over-Rotation and Resets

Precise alignment is mandatory because the game requires exact geometric matching before tokens can drop through.

Use short, controlled drags: Quick flicks can cause the rings to drift past their intended stops or stall between rotational detents. Keep your finger on the screen until the ring settles securely into place.
Trace before releasing: Visually confirm the entire radial line from the center to the exterior before making your final outer turn.
Restart if scrambled: If multiple rings become misaligned and pieces become stuck between opposing walls, tap the restart button to reset the layout rather than spending extra moves unwinding mismatched layers.