Rotate Rings Level 218 Solution: Step-by-Step Guide

To solve Level 218 in Rotate Rings, align the concentric rings using an outside-in sequence to create an unobstructed escape channel for the central locked pins. Turning the inner rings before locking the outer layer in place leads to blocked channels and trapped pieces.

Step-by-Step Ring Alignment

Follow this three-step order to clear the stage without hitting dead ends:

Set the outer ring base: Rotate the outermost ring clockwise until its widest notch aligns directly with the static release point at the 12 o'clock position. Once aligned, do not touch this ring again.
Open the middle channel: Rotate the intermediate ring counter-clockwise until its primary cutout matches the outer ring's opening. This connects the inner chamber directly to the outer discharge point.
Release the core pins: Rotate the innermost core ring clockwise until its release peg faces the unified channel. Once aligned, release your touch to let the pins slide down the corridor and exit the puzzle.

Ring Layer	Rotation Direction	Target Alignment	Role in Level 218
Outer Ring	Clockwise	12 o'clock static notch	Establishes the final exit boundary
Middle Ring	Counter-clockwise	Outer ring gap	Bridges the core chamber to the exit
Inner Core	Clockwise	Open channel corridor	Discharges the locked pins

Troubleshooting Stuck Core Pins

If the core pins get stuck halfway through the exit path, the intermediate layer is usually misaligned with a decoy notch rather than the true channel:

Do not force the inner ring: Twisting the core while a pin is partially obstructed will not push it through.
Inspect the middle ring: The intermediate ring has asymmetrical cutouts. If an undersized secondary notch faces the exit, the opening is too narrow for the pins to pass simultaneously.
Rotate the middle ring 180 degrees: Turn the middle ring halfway around to replace the decoy gap with the primary cutout, then verify that the open corridor is completely clear from the core to the outer edge.