Sand Blocks: Drop Puzzle Level 264 Walkthrough

To clear Level 264 in Sand Blocks: Drop Puzzle, keep the sand bed level and group matching colors into dedicated zones so single-color paths can span continuously from the left wall to the right wall. Because dropped blocks dissolve into loose sand grains upon impact, stray colors that tumble across the board will sever horizontal clearing lines and cause the stack to build up rapidly.

Placement Orientation and Surface Flattening

Controlling the height profile of the sand is essential to prevent grains from sliding into unintended areas. Pieces that drop vertically form steep cones, causing sand to roll down the slopes and contaminate neighboring sections.

• Rotate shapes horizontally: Laying long blocks flat disperses the sand across a broader area, creating shallow piles rather than sharp peaks.
• Avoid upright irregular shapes: Dropping vertical L-shapes or T-shapes creates asymmetrical mounds that tilt incoming grains into the wrong lanes.
• Deposit outer edges first: Placing sand against the left and right borders establishes raised outer edges, which naturally channel subsequent center drops into stable troughs.
• Tuck away split colors: When a block contains multiple colors, position it so the secondary color settles against a wall or an existing boundary rather than in the center of the board.

Managing Color Zones

Dividing the board into distinct color areas prevents layers from trapping uncleared sand underneath. In Sand Blocks: Drop Puzzle, a line only clears when a single color forms an unbroken horizontal band from border to border. Mixing colors vertically creates layered strata where the lower sand cannot clear until every grain above it is removed.

Assign your primary active color to one half of the board while routing secondary colors toward the opposite wall. Merging incoming pieces with existing deposits of the same color preserves open corridors and keeps stray grains from cutting off horizontal lines.

Completing Horizontal Clears

A clear triggers only when a color connects continuously from the far-left border to the far-right border without interruption. A single grain of another color in the middle third of the board will prevent the clear from registering.

To complete a nearly finished line, drop matching pieces slightly above the existing gap. As the block dissolves, gravity pulls the loose grains down into the crevice to seal the connection.

Recovery Under High Stack Pressure

If the sand rises into the upper quarter of the board, abandon long-term zone planning and focus on an immediate clear to prevent topping out:

1. Identify the color with the widest horizontal spread across the basin.
2. Drop matching pieces directly into the thinnest gaps along that color's band, even if secondary colors fall into awkward positions elsewhere.
3. Allow the line to clear, which drops the entire sand bed and creates vertical headroom to resume standard color separation.