To clear Level 26 in Sort Streak: Color Puzzle, designate one of your two empty buffer tubes as an open transfer lane while using the other strictly to consolidate matching base colors. Never place mismatched colors into both empty tubes at the same time, because losing completely open buffer space prevents multi-segment moves and leads to an immediate soft-lock.

Layout Rules and Tube Constraints

Level 26 scatters four to five distinct colors across mixed test tubes with four-unit capacities, supported by two empty buffer tubes. Because base layers remain trapped under opposing shades, you cannot resolve the board by simply clearing visible top segments.

Before committing your opening moves, inspect the foundations of all mixed tubes:

  • Scan tube foundations: Identify tubes where two matching segments already sit at the base. These provide natural anchors for full four-unit stacks.
  • Check stack capacity: Every tube holds exactly four units. Avoid pouring a top color if the receiving tube lacks space to hold the full exposed segment.
  • Track buried duplicates: Locate where the remaining segments of each color are hidden before consolidating top layers.

Step-by-Step Pouring Order

Securing a clean working tube within your first four moves keeps the board open. Use the following sequence to progress through the opening and mid-game:

  1. Consolidate exposed surface duplicates: Merge identical top colors between mixed tubes without touching either empty buffer tube. This exposes underlying layers with zero buffer cost.
  2. Open a temporary staging lane: Move an obstructing top color into your first empty buffer tube only if doing so immediately frees a buried segment that can merge onto an existing stack.
  3. Excavate fragmented base colors: Shift surface blockers to clear the tube containing matching pieces of your most fragmented color.
  4. Anchor your first mono-color tube: Gather all four units of a single color into one tube. Sealing a four-unit stack permanently solves that color and permanently frees its original tube as a fresh buffer.
  5. Chain remaining clears: Use the newly cleared tube space to cycle through the remaining exposed top segments in reverse order, filling completed tubes sequentially.

Buffer Tube Management

Managing your two empty buffer tubes determines whether you maintain transfer flexibility or freeze the board.

Buffer StrategyActionTactical Outcome
Single-Color StagingPour only matching color units into an empty tubeKeeps the tube open for building a full four-unit stack
Pass-Through TransferMove an obstructing top color temporarily, then clear itKeeps an open lane available for complex swaps
Dual-Color SplittingPlace different colors into both empty tubesTriggers gridlock by eliminating empty transfer slots
Premature StackingStack three units when the fourth unit remains buriedRestricts tube headroom to one unit and limits moves

Common Failure Points and Recovery

The most common mistake on Level 26 is premature stacking. Grouping three matching segments into a single tube leaves only one slot of open headroom. If the fourth unit is buried under multiple opposing colors elsewhere, you will run out of space to shuffle those blockers, stalling the puzzle.

Always verify that all four units of a color are accessible before filling a tube past two units. If you accidentally place different colors into both buffer tubes and run out of valid transfers, use the in-game undo tool to rewind three or four steps rather than restarting the entire level.

Sort Streak: Color Puzzle icon

Free Sort Streak: Color Puzzle Codes

Current active codes and how to redeem them.

View Codes
Emily Johnson

Emily Johnson

Emily writes practical mobile strategy guides with a focus on resource planning, base progression, and the early decisions that shape a long-term account.