To solve Level 3 in Sort Streak: Color Puzzle, transfer the top segment of Tube 1 into the empty Tube 3 to expose the matching color underneath. Completing the level requires five moves without mixing mismatched colors into the single open buffer tube.
Level 3 Initial Board Setup
Level 3 features three vertical tubes with a four-segment capacity each. Tubes 1 and 2 start filled with alternating color layers, while Tube 3 begins completely empty:
- Tube 1: Contains alternating color segments, blocking access to its lower matching color.
- Tube 2: Contains the complementary alternating color segments.
- Tube 3: Starts empty and serves as your sole holding buffer.
Because you cannot place a color segment on top of a different shade, Tube 3 must hold the first transferred piece to open up identical layers beneath it.
Step-by-Step Move Sequence
Execute these five transfers in order to consolidate both colors into uniform four-segment stacks:
- Pour Tube 1 into Tube 3: Shifts the topmost color segment into the empty buffer, uncovering the matching base color in Tube 1.
- Pour Tube 2 into Tube 1: Transfers the matching top color from Tube 2 onto Tube 1, grouping that color together.
- Pour Tube 2 into Tube 3: Moves the newly exposed top color from Tube 2 directly onto the matching piece in Tube 3.
- Pour Tube 1 into Tube 2: Shifts the grouped secondary color into Tube 2, completing the first fully uniform tube.
- Pour remaining segments into Tube 3: Transfers the remaining primary color pieces into Tube 3 to assemble the final four-piece stack and finish the level.
| Step | Source | Destination | Board Result |
|---|---|---|---|
| 1 | Tube 1 | Tube 3 | Uncovers Tube 1 base color; sets Tube 3 holding color. |
| 2 | Tube 2 | Tube 1 | Stacks matching secondary color segments in Tube 1. |
| 3 | Tube 2 | Tube 3 | Stacks matching primary color segments in Tube 3. |
| 4 | Tube 1 | Tube 2 | Fills Tube 2 to complete the first uniform tube. |
| 5 | Remaining Pieces | Tube 3 | Fills Tube 3 to complete the second uniform tube. |
Buffer Management and Streak Protection
Maintaining your active win streak requires avoiding gridlock in the single buffer tube:
- Dedicate the buffer tube to one color: Never drop an arbitrary piece into Tube 3 if you cannot follow it with a matching color or empty it immediately. A mismatched layer locks the buffer and forces a level restart.
- Target the deepest base layer: Look at the bottom segments of Tubes 1 and 2 before making your first tap. Direct your moves toward uncovering and stacking onto the tube that already has the deepest uniform foundation.
- Wait for transfer animations to settle: Tapping destination tubes too quickly while segments are in motion can cause missed inputs, leading to misordered transfers that break your streak.
Free Sort Streak: Color Puzzle Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
81 players commented on this guide.
The explanation is clear, especially for beginners.
This guide answered the exact question I had.
I wish I had read this before upgrading the wrong thing.
Nice guide. I am checking the other Sort Streak: Color Puzzle articles next.