Stone Island : Simulator TNT Mining and Excavation Guide

To mine efficiently with TNT in Stone Island : Simulator, clear non-valuable surface stone around your targeted ore vein first, arrange your explosive charges in a grid, and retreat beyond the blast radius before triggering detonation.

Setting Up Explosive Placements

Placing TNT strategically yields higher ore output and prevents wasted explosives. Follow this sequence when preparing a mining zone:

1. Clear the Perimeter: Use standard tools to remove a narrow ring of surface stone around the ore vein. This keeps the explosive energy directed inward toward the ore instead of dispersing into surrounding dirt.
2. Layout a Charge Grid: Position TNT charges in a spaced grid pattern across high-density nodes. Overlapping blast waves clear a larger volume of target material per detonation cycle.
3. Verify Area Integrity: Check that nearby structures, looting caches, and transport vehicles are outside the intended blast area.

Managing Detonation Safety and Infrastructure

Detonating TNT without proper precautions can destroy equipment or harm your character.

• Open Surface Mining: Retreat to a distance greater than the explosive blast radius before triggering the fuse.
• Underground Tunneling: Establish a clear escape route or use delayed triggers to exit narrow shafts safely.
• Pre-Blast Checks: Survey the site for critical support beams or vehicles to avoid structural collapse and high reconstruction costs.

TNT Conservation and Resource Ratios

Because TNT requires valuable crafting materials, reserve explosives for deep-earth excavation and high-value ore veins rather than basic clearing.

If a targeted vein requires more than three TNT charges to clear, discontinue explosive mining at that location. Switch to a higher-grade pickaxe or relocate to a soft-material biome to preserve your stockpile.

Handling Resistant Terrain and Mine Instability

Certain biomes feature high blast-resistant terrain, such as reinforced stone or bedrock. Stacking multiple TNT units directly against bedrock is ineffective. Instead, target environmental seams or natural structural weaknesses where blast forces can penetrate deeper.

Heavy explosive usage can destabilize underground mines. Watch for visual indicators of structural instability:

• Falling dust and rock debris from shaft ceilings
• Shifting wall textures along tunnel walls

If you observe these instability signals, stop blasting immediately. Place temporary support beams throughout the affected area before continuing your excavation to avoid cave-ins and lost gear.