To design an ancient city ruins scenic area in Township, dedicate an isolated 12x12 to 20x20 plot along your town's natural borders, surround it with water trenches to form an excavation moat, and anchor the interior with stone monuments and asymmetrical relic clusters. Finish the site by weaving broken dirt and cobblestone paths through wild foliage to create an authentic archaeological landmark without obstructing daily production.
Plot Placement and Buffer Zones
Situate the ruins along a mountain border, coastal edge, or deep forest boundary. Placing ancient stone decor directly against modern factories, apartment towers, or paved streets ruins visual immersion and clutters your workspace. A perimeter plot leverages the natural landscape as an organic boundary, making the site look like an authentic archaeological discovery unearthed during town expansion.
Carve out a dedicated zone between 12x12 and 20x20 tiles:
- Perimeter Margins: Leave a buffer strip between the ruins and your farming or production plots to prevent decorative mis-taps.
- Natural Backdrops: Back the excavation against the mountainside or unpaved expansion sectors to frame the ruins naturally.
- Production Separation: Keep high-frequency buildings like the Bakery, Dairy Factory, and Feed Mills well outside this zone so harvesting and collecting remain unhindered.
Excavation Moats and Island Zoning
Water terrain establishes clear excavation boundaries and simulates historic moats or sunken waterworks. Using jagged, non-linear water edges creates the look of weathered riverbeds or ancient defensive canals rather than artificial decorative pools.
Structure your water layout around three features:
- Outer Moat: Dig a canal two to three tiles wide around the perimeter to isolate the ruins from the urban town grid.
- Entry Causeway: Bridge the moat with a narrow, one- or two-tile dirt or stone crossing to serve as the single entrance into the site.
- Interior Basins: Carve small 2x2 water pockets inside the courtyard to simulate flooded chambers, sacred pools, or collapsed cisterns.
Relic Selection and Asymmetrical Layout
Select classical and archaeological decorations, such as obelisks, arches, stone pavilions, carved statues, and broken pillars. Position the tallest centerpiece slightly off-center or toward the rear axis to establish visual hierarchy and depth.
Avoid symmetrical layouts, which look like modern public parks rather than authentic ruins:
- Cluster broken columns and tumbled fragments unevenly near the main entrance.
- Leave an open, irregular stone courtyard in front of the primary monument.
- Place low stone walls and pedestals at varied angles to suggest partially collapsed architecture.
Pathing with Dirt, Cobblestone, and Overgrowth
Standard asphalt roads break the atmosphere of an excavation site. Instead, combine cobblestone pavers, dirt paths, and exposed grass:
- Main Spine: Lay a primary cobblestone trail from the entry causeway to the central relic.
- Weathered Transitions: Break the hard edges of your path by replacing selected stone tiles with coarse dirt patches.
- Weed Infill: Leave isolated 1x1 grass gaps inside paved sections to simulate wild vegetation pushing through cracked stone.
- Secondary Trails: Run narrow dirt branches toward smaller side alcoves containing statues or stone chests.
Foliage and Rock Layering
Dense, rugged foliage blends hard masonry into the surrounding landscape. Avoid manicured flowerbeds and formal town hedges in favor of untamed wilderness assets.
| Foliage and Terrain Type | Recommended Assets | Optimal Placement | Aesthetic Purpose |
|---|---|---|---|
| Boundary Canopy | Tall Pines, Cypress Trees | Outer perimeter borders | Masks nearby urban buildings and frames the site |
| Accent Undergrowth | Wild Shrubs, Low Bushes | Bases of pillars and walls | Creates an overgrown, nature-reclaimed look |
| Rock Scatter | Boulders, Small Rock Piles | Canal banks and path corners | Simulates exposed bedrock and collapsed masonry |
| Trail Edging | Dirt Patches, Open Grass | Along cobblestone margins | Softens artificial grid lines with natural wear |
Road Connections and Pedestrian Control
Decide whether you want townspeople to walk through the ruins. Connecting the entry causeway to your main road network allows pedestrians to tour the site. If you prefer the look of an abandoned, restricted excavation, omit paved road connections entirely. Leaving the causeway unpaved prevents delivery vehicles and townspeople from cutting across the ruins, preserving a secluded atmosphere.
Free Township Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
116 players commented on this guide.
Good guide for Township players. The strategy part was useful.
The explanation is clear, especially for beginners.
Nice guide. I am checking the other Township articles next.
I tried this today and it worked better than my old setup.