Amaze GO! Arrows Level 299 Clearance Guide

To clear Level 299 in the Arrows mode of Amaze GO!, tap the outward-facing perimeter arrows first to open unobstructed exit lanes off the grid. Arrows cannot leave the board if any tile obstructs their straight-line flight path; tapping a blocked arrow triggers a collision shake without clearing the piece. Working from the perimeter inward prevents grid deadlocks and clears the stage systematically.

Clearing Sequence for Level 299

Dismantling Level 299 requires executing an outside-in clearing order so that trapped interior tiles gain open exit trajectories.

Step	Target Tile Group	Immediate Objective	Board Impact
1	Outward-pointing edge tiles	Clear unobstructed boundary exits	Creates initial gaps along the board frame
2	Parallel trailing edge arrows	Follow cleared paths along the boundary	Strips the outer perimeter frame
3	Flank-facing mid-tier arrows	Fly through newly opened edge gaps	Breaks locks on the center quadrant
4	Core cluster key arrow	Clear through empty escape lanes	Uncoils the remaining reciprocal deadlocks

1. Remove Free Perimeter Arrows

Scan all four external boundaries (top, bottom, left, and right) for tiles pointing directly away from the grid into empty space.

Tap these outward-pointing boundary pieces first to slide them off the screen.
If two arrows align along the outer frame pointing in the same direction, tap the leading arrow first.
Once the leading arrow exits, tap the trailing arrow to clear the boundary lane.

2. Unlock Mid-Layer Cross Paths

After stripping the exterior frame, examine the newly exposed mid-layer arrows. These tiles cross neighboring rows and columns and cannot leave until edge blocks vacate.

Locate mid-tier arrows whose flight corridors now exit through the gaps opened in step 1.
Prioritize launching mid-layer arrows that free the rear tails of other blocks, ensuring each tap unlocks the next piece in sequence.

3. Clear the Core Cluster

The center of Level 299 features a tight formation of interlocking arrows pointing in perpendicular or opposing directions.

Trace the flight line of each remaining central arrow through the cleared mid-layer and boundary lanes.
Tap the single key arrow that possesses an unobstructed route off the board.
Once this key piece leaves, tap the adjacent arrows that were trapped by its body as their exit lines open up, finishing the remaining linear sequence.

Traps to Avoid

Incomplete Flight Path Tracing: An arrow may have open space directly in front of it but collide with a tile farther down the line. Always verify the entire flight path to the edge before tapping.
Premature Center Taps: Tapping central clusters before clearing boundary lanes causes collision shakes and stalls progress. Keep clearing moves focused strictly on the outside layers first.
Reversing Parallel Pairs: Tapping a rear arrow before its leading partner fails to clear the piece. Always launch the forward arrow to clear the route for the trailing tile.