Amaze GO! Levels 1–30 Arrow Clearing Order Guide

To clear early puzzles in Amaze GO!, tap unobstructed outer arrows pointing away from the board before touching interior pieces. Every block travels along its indicated directional vector in a straight line. If another block sits anywhere along that vector, the tapped piece collides, shakes, and resets to its starting square. Removing outer border blocks first creates the empty runways needed to vent trapped interior arrows without collisions.

---

Core Movement Mechanics by Stage Range

Early stages gradually introduce tighter spacing, shared tile borders, and multi-piece dependency chains.

Level Range	Primary Board Obstacle	Clearing Strategy
Levels 1–5	Simple layouts with single-vector paths	Tap unobstructed outward-facing arrows immediately.
Levels 6–10	Shoulder-to-shoulder blocks and shared edges	Trace narrow exit lanes to ensure corners do not clip neighbors.
Levels 11–20	Perpendicular interlocks and dependency loops	Trace collision paths backward to find and tap the unblocked keystone block.
Levels 21–30	Dense geometric clusters and corner anchors	Peel the flat edges first to open room for inward-facing corner pieces.

---

Step-by-Step Clearing Sequence

Follow this sequence on each stage from Level 1 through Level 30 to prevent board-locking collisions:

Scan the outer perimeter: Look at all four edges of the puzzle grid to find arrows that point directly into empty board borders.
Clear direct exits: Tap each free outward-facing piece. Once tapped, an unblocked piece slides off the board and permanently clears its coordinate.
Trace new interior runways: Look directly behind the coordinates of the blocks you just cleared. Any inner piece pointing into those newly vacated squares now has an open path to exit.
Identify and remove the keystone block: When arrows form an interlocking chain where block A blocks B and B blocks C, follow the directional arrows forward until you locate the single piece whose exit line is unobstructed. Tap that keystone arrow to break the lock and clear the chain in reverse order.
Dismantle corner traps: For dense stages in Levels 21 through 30, leave inward-pointing corner blocks in place until you have cleared the adjacent flat-edge pieces. Once border space beside the corner is clear, tap the remaining corner pieces outward.

---

Tips for Untangling Dense Clusters

Trace before tapping: Tapping an obstructed piece causes a collision shake and delays your solve. Visually follow the straight line from the arrow tip to the board edge before interacting with a tile.
Break head-to-head blocks from the side: When two tiles point directly at one another, neither can move forward. Look for an adjacent, perpendicularly aligned tile that can exit to the side to break the deadlock.
Check symmetrical paths: In dense layouts near Levels 28 through 30, cleared paths on one side of a square or diamond formation often reveal identical clearing opportunities on the opposite side. Check mirrored positions after every clean exit.