To clear Level 6 in Block Out, you must unlock the white gem gate blocking the rear column without letting unmatched blocks fill your bottom dock. The solution requires clearing unobstructed front-row matches first, reserving dock capacity for the white trigger blocks that open the barrier, and then routing the liberated back-row tiles.
How the White Gem Gate Works in Level 6
Level 6 introduces gem gates as physical obstacles that halt block movement along sorting lanes. In this stage, a locked white gem gate shields the rear column, preventing you from tapping or clearing those back pieces until the gate's condition is met.
The white gate remains locked until you route its required matching blocks into play. Tapping random foreground blocks will not advance the board if they do not contribute to opening this barrier. Because all pieces stacked behind the gate are completely immobilized, your entire opening plan must center on freeing the specific trigger pieces needed to open the white gate.
Managing the Buffer Dock to Prevent Deadlocks
The holding dock at the bottom of the screen stores blocks that do not immediately complete a match or exit the board. This dock has a strictly limited number of slots. If the tray fills completely without completing an automatic match, the board deadlocks and forces a restart.
In Level 6, dock management is the primary failure point. Pulling non-essential front blocks into the dock leaves no space for the white gate trigger pieces. To prevent a deadlock:
- Reserve dock slots exclusively for blocks that immediately clear a set or directly expose a white gate trigger.
- Keep at least two dock slots empty before initiating the moves that target the white gate.
- Avoid tapping tiles that cannot resolve immediately into an exit or a matched pair.
Step-by-Step Move Order
Clear the board methodically from the outer layer inward so the holding dock never reaches full capacity.
- Clear Immediate Front Pairs: Tap and eliminate the outermost blocks that have open exit paths. Completing these sets removes foreground clutter without stranding unmatched tiles in your dock.
- Route the White Gate Triggers: Once the lanes leading to the barrier are open, tap the white pieces and corresponding gem blocks that power the lock. Satisfying this requirement causes the white gate to retract.
- Flush the Rear Column: With the gate open, tap the newly uncovered rear pieces. These blocks can now travel down the clear corridor and exit the board to finish the stage.
| Level 6 Phase | Primary Objective | Buffer Dock Impact | Deadlock Risk Level |
|---|---|---|---|
| Phase 1: Outer Layer | Eliminate exposed front matching sets | Low; completed sets clear immediately | Moderate if unmatched colors are pulled |
| Phase 2: Gate Activation | Route white gate trigger blocks | Controlled; temporarily takes 1–2 slots | High if dock lacks open capacity |
| Phase 3: Column Flush | Clear liberated back-row tiles | Negative; empties remaining tray blocks | Low; exit path is fully open |
Execution Tips for Mobile Play
Fast, clean clears rely on accurate finger placement and steady pacing:
- Center your taps: Narrow lane spacing on iPhone and Android screens can cause misclicks near borders. Tap the direct center of each block to avoid accidentally pulling the wrong color into the tray.
- Do not queue inputs during animations: Tapping multiple tiles rapidly while your tray is nearly full can cause an unintended block to register before a matched set clears, triggering an instant loss.
- Anticipate rear tiles: When the final white trigger block reaches the gate, identify your next target in the rear column while the opening animation plays so you can tap it the moment it becomes active.
Free Block Out Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
140 players commented on this guide.
I wish I had read this before upgrading the wrong thing.
I tried this today and it worked better than my old setup.
This saved me time in the early game.
This guide answered the exact question I had.