In Bus Traffic Fever! Level 133, remove the key only when your dock has at least two open bays and the waiting passenger line directly matches the color of the locked bus. Tapping the key vehicle prematurely pulls it into the boarding zone before its riders arrive. This stalls the bay, blocks incoming traffic, and causes an immediate deadlock.

Conditions Required Before Removing the Key

Do not tap the key simply because the driving path to it is clear. Treat the key vehicle as a fixed wall until all of the following conditions are met:

  • Passenger Alignment: The locked bus must match either the current front passenger group or the group immediately behind it.
  • Dock Capacity: You must have at least two vacant docking bays available so neither the key carrier nor the unlocked bus sits idle.
  • Driving Lane Clearance: The route between the locked bus and the boarding bays must be completely free of crossing traffic.

If any of these conditions are missing, leave the key on the grid and continue cycling accessible buses that match active passenger colors.

Level 133 Clearance Sequence

Clearing the stage requires working from the outer perimeter inward to establish clear pathways before freeing central vehicles.

Stage PhaseTarget AreaMain ActionBay Requirement
Phase 1: Outer GridPerimeter vehiclesClear unobstructed buses that match front queue passengersKeep at least 2 bays open
Phase 2: Path PrepKey access lanesEvacuate blockers directly ahead of the key vehicleMaintain rapid bay turnover
Phase 3: Key ReleaseKey carrierRoute the key vehicle to the dock to drop the barrierFill and depart instantly
Phase 4: Core SweepLiberated vehiclesSend the newly unlocked buses into the open baysClear remaining grid traffic
  1. Dispatch matching edge buses: Tap only exterior buses whose colors match the active queue to clear perimeter lanes without filling bays with stalled vehicles.
  2. Open the key corridor: Clear the specific vehicles obstructing the key carrier once their corresponding passenger groups appear.
  3. Trigger the key: Move the key vehicle into the dock once the passenger line aligns with the locked bus, immediately lowering the barrier.
  4. Empty the center: Route the unlocked bus directly into a vacant dock slot, boarding passengers and clearing the inner board.

Managing Dock Saturation and Deadlocks

Every vehicle that enters a dock bay must have enough waiting passengers to fill its seats and depart immediately. If a bus enters the dock without matching riders at the front of the line, it occupies that slot until the queue shifts. Losing even one bay to an idle bus severely limits your clearance options, while losing two or more typically leads to total gridlock.

If you miscalculate and an idle bus enters the dock, scan the remaining free vehicles on the grid for any bus that matches the active passenger color. Clearing that bus advances the passenger line, which can unlock the stalled vehicle in your dock. If the docks fill completely with mismatched vehicles and no accessible bus on the grid matches the front passenger group, restart the level immediately to save resources.

Bus Traffic Fever! icon

Free Bus Traffic Fever! Codes

Current active codes and how to redeem them.

View Codes
James Brown

James Brown

James focuses on Android gaming on PC, emulator setup, controls, performance tuning, and practical troubleshooting for longer play sessions.