To beat Level 248 in Bus Traffic Fever!, dispatch only the vehicles that immediately match the colors of passengers at the front of the queue, and keep at least two of the five holding docks open at all times. Level 248 presents a dense parking lot where central buses with opposing orientations are trapped behind perimeter vehicles. Dispatching vehicles without corresponding passengers will rapidly clog your holding docks, causing gridlock and failing the stage.

Level 248 Board Layout and Core Hazards

The parking lot in Level 248 features an interlocking grid with narrow exit lanes surrounded by five holding docks. Passengers queue sequentially, boarding buses only from the front of the line. Sending a vehicle into a dock without enough matching passengers leaves that bus stranded in the bay until the line cycles through.

Lot ZoneVehicle OrientationPrimary ObstaclePriority Action
Outer PerimeterHorizontal and verticalBlocks central exit corridorsClear when matching the current front-row passengers
Central CoreOpposing alignmentsTrapped behind mixed bumpersFree perimeter blockers before attempting center moves
Holding DocksFive static baysStalls when unmatched buses enterReserve at least two empty bays for maneuvering

Several vehicles in the central column face opposite directions and require clear paths at both ends before they can exit. A single bus stuck in a dock waiting for distant queue colors reduces your working capacity and risks an immediate stall.

Clearing the Outer Perimeter

Begin by checking the front of the passenger queue before tapping any vehicle with an open exit path. Even if a perimeter bus has a clear route, do not send it to a dock unless its color corresponds to the travelers at the front of the line. When a bus matches the active passengers, it fills up, departs immediately, and frees the dock for your next move.

Moving an unmatched perimeter vehicle is justified only under one condition: moving that vehicle must immediately unblock two or more trapped buses whose colors match the active queue. For example, parking an unmatched green bus is worthwhile if it directly exposes waiting yellow and red buses that can board travelers and depart right away. If an outer move only exposes another blocked, non-matching vehicle, leave it in place.

Managing Dock Space and Passenger Capacity

Each bus requires a full load—typically three to four passengers—to depart. If a bus boards only one passenger and no other matching travelers appear near the front of the queue, it remains stuck in its dock.

Follow these rules to keep docks cycling continuously:

  1. Count visible passengers: Verify that the front of the line contains enough matching travelers to fill the bus completely before tapping it.
  2. Prioritize single-turn departures: Choose the vehicle that can fully board and leave immediately over one that will sit partially loaded.
  3. Preserve two buffer slots: Stop sending unmatched vehicles to docks whenever available slots drop below two.

Step-by-Step Clearing Sequence

Dismantle the board in four progressive phases to avoid overwhelming the holding bays:

  1. Queue-Driven Openers: Clear unobstructed exterior buses that directly match the leading passenger group to keep all docks rotating freely.
  2. Gateway Removal: Identify perimeter vehicles that pin down the central column. Route them into holding bays only when matching passengers are queued or when their removal instantly frees active colors.
  3. Core Extraction: Clear the interlocking central buses as their corresponding passenger waves reach the front of the line.
  4. Final Lot Evacuation: Empty remaining corner spots sequentially as the final passenger groups arrive.

Common Mistakes to Avoid

The most frequent failure on Level 248 is tapping clear vehicles on impulse. An open exit lane does not mean a bus should be moved. Filling four docks with idle vehicles leaves no margin for error, often forcing a stage restart.

Additionally, always inspect bumper alignment in the center of the grid. Some central vehicles appear open but remain blocked by the rear bumper of an adjacent bus. Trace the entire exit path before committing to a move to ensure the lane is fully unobstructed.

Bus Traffic Fever! icon

Free Bus Traffic Fever! Codes

Current active codes and how to redeem them.

View Codes
Emily Johnson

Emily Johnson

Emily writes practical mobile strategy guides with a focus on resource planning, base progression, and the early decisions that shape a long-term account.