Bus Traffic Fever! Level 276 Walkthrough: How to Clear Gridlock

To beat Level 276 in Bus Traffic Fever!, dispatch perimeter buses that directly match the colors at the front of the passenger queue, while keeping your temporary holding dock as empty as possible. Because buses cannot reverse and center lanes are locked behind bumper-to-bumper vehicles, sending an unmatched vehicle into the dock too early fills your limited holding bays and triggers an instant loss.

Level 276 Layout and Gridlock Obstacles

Level 276 positions vehicles in overlapping vertical and horizontal columns. The primary bottleneck involves large central buses pinned in place by horizontal divider units.

Every vehicle moves strictly forward along the direction of its hood. If a bus reaches the outbound ramp without matching the active passenger color at the front of the line, it parks in the temporary holding dock. The level offers very few dock slots, so you cannot use the dock as general parking while hunting for matches.

Step-by-Step Clearing Sequence

Clear the parking lot in four distinct phases to avoid filling the holding dock:

1. Check the front passenger queue: Look at the first three passenger clusters waiting at the gate before moving any vehicle.
2. Peel matching perimeter buses: Tap outer vehicles that match the active front colors and have a straight, unobstructed line to the exit. These board immediately and leave the board without consuming dock slots.
3. Shift horizontal cross-blockers: Once outer lanes are open, move the horizontal buses that pin the bumpers of vertical center units. Move these only if their matching color appears within the next three passenger slots.
4. Release high-capacity center buses: Route the freed center buses to the loading zone to absorb the largest passenger clusters in the queue.
5. Extract corner shuttles: Send out the remaining small shuttles trapped in the rear corners to finish the stage.

Dock Management and Vehicle Clearance Rules

Maintaining space in the waiting dock requires strict turn discipline:

• The three-slot rule: Never send a bus into the dock unless its color is among the top three visible groups in the passenger queue. A bus matching passengers further back will sit in the dock indefinitely, reducing your margin for maneuvering.
• One-in, one-out exchanges: If you must park an unmatched bus in the dock to open a lane, verify that the newly opened path immediately releases a bus matching the current queue. This boards passengers instantly and restores your open dock capacity.
• Vehicle length clearance: Two-passenger shuttles need minimal distance to clear an intersection, but four-passenger buses require longer runways. Before dispatching a long bus, ensure the path ahead has enough space for its rear bumper to fully clear crossing lanes, preventing accidental gridlock behind it.