Colony Flow! Level 937 Strategy Guide

To clear Level 937 in Colony Flow!, focus your initial turns on breaking through the dense cluster of blocks in the center of the board to establish vertical movement corridors. Once the center is open, route large groups of matching color cubes into their respective exit holes while storing non-active blocks along the perimeter to preserve your move count.

Clearing Central Grid Congestion

The main bottleneck in Level 937 is the heavy block density in the middle zone of the grid. Leaving these central blocks untouched restricts worker ant pathing and prevents long-range movement across the board.

• Establish Vertical Corridors: Target central blocks that connect the top and bottom sections of the grid. Clearing a vertical path gives you the operational space needed to realign larger block groups.
• Avoid Early Edge Focus: Do not spend turns clearing isolated blocks on the board edges during the opening moves. Clearing the perimeter first leaves the middle grid congested, isolating color groups and draining your available turns.
• Target Anchor Colors: Identify central blocks that obstruct the highest number of potential matches. Removing these anchor blocks opens multiple routing lanes at once.

Organizing Color Groups and Using Perimeter Space

Efficient play requires matching large clusters of identical colors rather than clearing single cubes. Use the outer edges of the grid as a buffer area to keep your primary lanes clear.

• Form Uninterrupted Lines: Align matching cubes in continuous paths leading straight to exit holes to maximize the impact of every move.
• Stage Auxiliary Blocks: Move blocks that do not currently fit an active route to the board perimeter. Staging non-matching blocks in corners prevents accidental premature clears and keeps central channels open.
• Adjust Alignment with Row Shifts: If a matching route becomes blocked by unfavorable block placements, spend one move shifting an entire row or column by a single tile. This realigns disconnected color groups without wasting multiple turns on low-value matches.
• Hold Single Blocks: Avoid clearing isolated single blocks unless they directly obstruct a primary exit route. Save them until incoming matching blocks drop into adjacent spaces.

Step-by-Step Level 937 Execution Sequence

Follow this sequence to maintain move efficiency from start to finish:

1. Clear Central Obstacles: Target the middle cluster immediately to establish a clear vertical corridor between the upper and lower grid segments.
2. Route the Largest Color Cluster: Identify the largest color group on the board and clear the direct path between that group and its matching exit hole.
3. Move Non-Active Cubes to Edges: Shift mismatched or blocking cubes to perimeter tiles to preserve space in the center.
4. Realign Block Rows When Stalled: Shift a row or column by one tile if bad block drops close off your main path.
5. Finish Remaining Colors: Match remaining isolated blocks during the final 10% of the board once major paths are clear and move paths are fully open.