CubeAway: How to Beat Level 74

To beat Level 74 in CubeAway, dismantle the block cluster from the outside inward by clearing outward-facing perimeter cubes before touching the middle layer or core. A cube will only fly off the screen if its entire exit path is unobstructed. Tapping a blocked cube triggers a collision bounce that wastes time, so orbit the formation across all axes to confirm that an arrow points directly into open space.

Step 1: Clear the Free Exterior Perimeter

Start by rotating the puzzle along both the horizontal and vertical axes before tapping any blocks. Look for outer rim cubes whose arrows point perpendicularly away from the formation.

• Top and bottom caps: Tilt the camera vertically to inspect the roof and underside of the cluster. Level 74 features solitary caps pointing straight up or down with no obstacles in their path. Clearing these exposes the inner seams immediately.
• Corner flank blocks: Check all lateral corners for cubes pointing away from the center line. Tap these to flatten the silhouette.
• Avoid parallel edge traps: Do not tap perimeter blocks whose arrows point along the edge rather than directly into open air. These parallel paths run into protruding corners and will bounce in place.

Step 2: Strip the Middle Layer Using Created Voids

Once the exterior shell is removed, Level 74 leaves a congested intermediate layer where cubes face inward or cross adjacent faces. Clearing outer blocks opens flight corridors for blocks that were previously pinned down.

Orbit the camera after every two or three cleared blocks. Look at the formation from a 45-degree isometric angle to spot interior openings. In Level 74, several middle-tier cubes face inward toward the spaces cleared during the opening step. These cubes can safely pass straight through the formation and exit off the screen, provided the void extends completely through the opposite side. If an arrow points toward an interior space blocked by an opposite wall, leave it until that backing block is removed.

Step 3: Unlock the Core Dependencies

After removing the middle layer, you face a compact, interlocking central core where cubes trap each other in opposing pairs or loops.

To break this deadlock:

1. Identify the single "key" block within the core whose arrow points toward a side of the board that was completely hollowed out in earlier steps.
2. Tap this key block to clear it through the open corridor, breaking the structural loop.
3. Tap the remaining core cubes in reverse order of their dependencies to clear the board.

Avoid rapid tapping across the cluster to guess viable moves. Tapping blocked blocks causes stalls that make tracking open lanes harder. Rotate vertically to keep the underside visible, confirm a clear trajectory, and remove blocks sequentially from outer caps to the central anchor.