Magic Sort! Level 450 Walkthrough: How to Clear the Puzzle

To clear Level 450 in Magic Sort!, empty one multi-layered tube immediately to create an open buffer space, then consolidate fragmented colors without splitting identical hues across multiple receiving bottles. Because standard tubes hold four liquid units and pours only succeed into an empty vessel or onto an identical color with open capacity, maintaining at least one fully cleared bottle is required to cycle through buried layers without deadlocking the board.

Early Phase: Opening a Dedicated Buffer Bottle

Your first objective is converting a mixed tube into a completely empty workspace within your first four to six moves. Shifting top colors horizontally across various partially filled bottles clutters the board and removes viable landing zones.

To clear your first working bottle:

Identify the easiest donor tube: Locate the bottle with the fewest distinct color segments or one whose top layers can be absorbed immediately by existing stacks.
Consolidate top segments: Pour matching surface layers onto identical colors elsewhere, making sure the receiving bottle has enough remaining capacity to take the entire layer.
Uncover buried base colors: Use temporary space only to peel away single-unit blocker colors that conceal uniform stacks beneath them.
Preserve the cleared tube: Once emptied, keep this bottle as a temporary transfer conduit rather than filling it with an incomplete, mixed set of colors.

Mid-Stage Sequencing: Filtering Layers Without Board Locks

After opening a buffer tube, the stage becomes an exercise in strict capacity management. Committing two or three units of an incomplete color into an open tube restricts incoming moves unless the remaining capacity can be satisfied immediately.

Before making any transfer, calculate two moves ahead:

Confirm that pouring an exposed color frees a useful layer underneath.
Verify that the revealed layer can either merge into an active stack or open a path to finish another bottle.
Avoid parking partial stacks in your sole empty bottle unless the next move immediately empties a different tube back to zero.

Every mid-game transfer cycle should either complete a full four-unit bottle or reset an occupied tube to empty.

Strategic Transfers and Bottleneck Management

The most common failure in Level 450 occurs when matching colors are split between two separate receiving bottles. Splitting a color divides your limited board space and quickly causes gridlock.

Transfer Type	Board Impact	Recommended Level 450 Action
Split-Color Stacking	Fills two receiving slots with the same incomplete color set.	Avoid completely; route all matching segments into one dedicated bottle.
Buffer Utilization	Provides open space to peel away single-layer blockers.	Evacuate the buffer tube immediately after exposing the target layer.
Base-Layer Extraction	Reveals deep foundation colors at the bottom of a tube.	Execute when the revealed base layer matches an active consolidation stack.
Full Tube Completion	Locks in four matching units and removes the color from play.	Complete full stacks early to permanently reduce active board complexity.

If you reach a state where no matching surface pours are available, review recent transfers. Shifting an upper segment back onto an alternative matching layer often restores the depth needed to reach trapped bottom colors.

Endgame: Locking In Completed Flasks

When four or five mixed tubes remain, switch from temporary cycling to finishing full color sets. Identify the color that has all four units accessible across surface layers and gather them into a single tube to lock it out.

Permanently completing bottles removes active variables and widens your remaining transfer options. Keep one bottle completely empty until the final two color pairs are ready to be consolidated, allowing you to solve the stage cleanly without using boosters or extra props.