To beat Match Factory! Level 940 without locking your tray, clear fully visible three-of-a-kind target sets from the upper layer first and maintain at least three empty tray slots at all times. Do not pull single items into your tray to excavate lower layers unless you can immediately tap their matching duplicates on the board.
Tray Slot Management and Lock Prevention
Level 940 provides seven collection tray slots. Filling all seven slots with mismatched items causes an immediate loss.
To prevent tray lock:
- Cap partial sets at two: Never hold more than two incomplete item sets (up to four slots filled) in your tray simultaneously. This reserves at least three open slots, allowing you to complete a fresh trio without risking a jam.
- Stop pulling when at four slots: If your tray contains four items across two incomplete sets, tap only the specific third items needed to complete and clear one of those sets.
- Never dig blindly: Avoid pulling non-target blocking items unless all three matching pieces of that obstacle are accessible to clear the set right away.
Step-by-Step Excavation Order
Items in Match Factory! are subject to physics and gravity. Grabbing items from the center of the pile causes higher pieces to tumble and bury key objectives deeper. Follow this three-step order to clear the board safely:
- Sweep outer surface targets: Match accessible, unobstructed target trios resting along the edges and surface slopes first. This clears clutter and reduces physical pressure on the pile without triggering uncontrolled shifts.
- Clear blocking wedges in trios: Identify bulky clutter items that physically pin target items down. Match these blockers as complete three-of-a-kind sets to let buried goals roll into view.
- Retrieve deep targets: Once the pile flattens out, collect the remaining target objectives required by the top goal bar.
| Clearing Scenario | Risky Move | Recommended Action |
|---|---|---|
| Pinned Target Item | Grabbing a single blocker with no matches exposed | Locate and clear all three duplicates of the blocker |
| Tray Reaches 4/7 Slots | Pulling a new single item to expose lower layers | Only tap the third item that completes an active tray set |
| Tall, Unstable Mound | Pulling items from the center of the base | Clear perimeter items first to safely settle the pile |
| Buried Target Quotas | Guessing under layers and filling tray slots | Deploy a Vacuum or Fan booster to expose pieces |
Visual Scanning and Cadence
Level 940 features a countdown clock that demands steady progress:
- Scan by color and pattern: Instead of searching for complex 3D shapes, scan the pile for bright colors, distinct textures, or high-contrast patterns to identify matching triples faster.
- Avoid rapid tapping flurries: Tapping frantically increases the risk of registering an unintended item as pieces tumble, instantly taking up a vital tray slot.
- Check outer boundaries: When no matches appear in the center, check the board perimeter where loose items settle under gravity.
When to Deploy Boosters
If the layout stalls or the countdown clock runs low, use boosters to bypass bottlenecks:
- Vacuum: Use this tool when target items remain buried under multiple layers of clutter. The Vacuum extracts three required objective items directly from the pile.
- Freeze: Trigger Freeze when the countdown drops below 30 seconds with multiple goals remaining. This stops the timer so you can locate matches without pressure.
- Fan: Activate the Fan if the board settles into a flat, spread-out arrangement that conceals items beneath horizontal overlaps. The Fan redistributes the pile to bring hidden pieces to the surface.
- Spring: Reserve the Spring for emergencies. If an accidental tap fills your sixth tray slot and risks an immediate lockout, use the Spring to clear tray items back out of the tray.
Free Match Factory! Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
24 players commented on this guide.
This helped me understand strategy much better.
I tried this today and it worked better than my old setup.
Nice guide. I am checking the other Match Factory! articles next.
The tips are practical and easy to follow.