Rotate Rings Level 79 Solution and Alignment Guide

To solve Level 79 in Rotate Rings, align the outer and middle rings to establish an open exit pathway before releasing the items trapped in the center. Aligning the inner core first drops balls into closed middle compartments, which wedges them against solid walls and forces a restart.

Step-by-Step Level 79 Rotation Sequence

Level 79 features independently rotating rings. Because the middle ring contains offset barriers rather than a straight channel, you must build an exterior corridor before emptying the core.

Step	Target Ring	Action	Alignment Goal
1	Outer Ring	Rotate until the gap meets the perimeter exit marker	Set the final exit corridor
2	Middle Ring	Align the middle opening with the outer ring gap	Form a continuous two-layer exit route
3	Inner Ring	Rotate slowly toward the aligned corridor	Drop the first set of spheres outward
4	Middle Ring	Micro-adjust if the second batch needs a shifted angle	Guide remaining items without backflow
5	Inner Ring	Complete the turn to release remaining items	Empty the center core completely

Lock the outer exit: Drag the outermost ring until its cutout matches the static exit point on the perimeter. Leave this ring stationary once positioned.
Open the middle bridge: Rotate the middle ring until its through-slot matches the outer ring opening, creating an unobstructed two-layer bridge.
Release the lead spheres: Slowly rotate the innermost ring toward the bridge until the first trapped items drop through.
Clear secondary items: If remaining items sit in an offset inner pocket, give the middle ring a slight turn to match their release angle, then complete the inner ring rotation to clear the board.

Ball Physics and Movement Control

Items in Rotate Rings carry momentum and can bounce off edges if rings are turned too fast. Follow these control rules to prevent rollout failures:

Avoid flicking: Swiping quickly causes spheres to bounce off ring thresholds and deflect backward into inner tracks. Drag rings at a steady, controlled pace.
Wait for complete exits: Let a falling sphere clear the outermost ring entirely before rotating another layer.
Recover stray spheres: If a ball falls into a dead-end pocket in the middle ring, gently rotate only that ring to tilt the ball into the active opening instead of resetting the level.

Traps and Failure Points to Avoid

Premature inner release: Never turn the center ring while the outer or middle exits are blocked. Dropping spheres into a sealed middle ring eliminates your turning clearance.
Deceptive baffles: Inspect each cutout before committing to an alignment. Genuine exits cut completely through the ring wall, whereas false baffle cutouts retain an exterior lip that blocks sphere passage.
Multi-touch input errors: Drag rings using a single finger along the circumferential track. Touching the screen with two fingers can rotate adjacent rings simultaneously and break calibrated pathways.