Smash Fest! Levels 101-120 Strategy Guide

To clear levels 101 through 120 in Smash Fest!, target foundational support blocks and structural keystones before attacking outer obstacles. Levels in this range feature tighter projectile limits and higher object density, making direct center shots inefficient. Conserving cannon ammunition relies on causing large structure collapses with single shots, triggering secondary falling debris, and adjusting your launch trajectory to hit flat target surfaces cleanly.

Targeting Support Blocks for Maximum Destruction

Blindly striking the center or top of a complex object pile wastes ammunition. Scan each layout before firing your first shot to locate the structural vulnerability holding up the rest of the object cluster.

Locate keystone supports: Search for single pillars, base blocks, or narrow ground-level supports holding suspended debris. Destroying these foundation points causes overhead blocks to drop under gravity.
Expose interior cores: If a dense cluster shields its main support, strike the outer edges first to pry open a clear line of sight to the interior support blocks.
Identify hidden blocks: If a structure remains upright despite taking damage, check behind foreground objects for concealed support pieces preventing a full collapse.

Conserving Projectile Ammunition and Triggering Collapses

Levels 101 to 120 limit your available shots, requiring every tap to perform more than one function. Aim to remove primary targets while clearing clear flight paths for subsequent shots.

Assess the screen layout: Identify which single block supports the largest portion of terrain before launching.
Setup chain reactions: Angle shots so collapsing debris falls directly into adjacent structures. A successful collapse can clear multiple target zones without using extra projectiles.
Avoid stationary barriers: Check your trajectory to ensure shots do not clip indestructible obstacles, which deflect your shot away from the main target.

Optimizing Shot Trajectories and Launch Angles

Projectiles deal maximum kinetic impact when striking surfaces directly. Sloped or angled hits cause bouncing, which reduces damage and risks striking unintended targets.

Aiming Factor	Optimal Adjustment	Consequence of Incorrect Aim
Surface Angle	Target flat, perpendicular surfaces directly.	Bounces off sloped edges with weak impact force.
Obstacle Density	Strike outer edges to loosen dense piles.	Direct force pushes the pile without breaking it.
Physics Shift	Restart the level if debris blocks line of sight.	Unfavorable debris patterns block clear trajectory lanes.

If a specific firing angle fails consistently, adjust your aim to land a perpendicular hit on a flat target section. If debris falls into an unfavorable pattern that blocks remaining critical targets, reset the level to refresh the initial block placement and physics state.