To clear Level 36 in Sort Streak: Color Puzzle, you must keep at least one of your two empty buffer tubes open at all times while methodically exposing buried color layers. Bottlenecks occur on this stage because starting columns contain three or four mixed colors each, leaving minimal margin for error. Your immediate goal is to merge matching surface units, cycle blocked pieces through a single buffer slot, and assemble one complete four-unit tube to restore full board mobility.

Board Setup and Initial Priorities

Level 36 provides two empty buffer tubes alongside multiple mixed columns, with each standard column holding up to four color units. Because most columns start packed with mismatched segments, moving pieces without a direct plan quickly fills your workspace and triggers an unresolvable stalemate.

Before making an opening transfer:

  • Count visible surface segments across all columns to spot direct color pairings.
  • Identify which color has the most accessible pieces across the top two layers.
  • Check the base segments of each column to locate deeply buried anchors before deciding which color to clear first.

Four-Step Clear Sequence

Work through the stage by moving from conservative top merges to active unblocking.

1. Consolidate Surface Matches

Merge identical top-layer colors across active columns without transferring any piece into an empty buffer tube. If two columns expose the same color on top, pour one into the other to free up column capacity. Keeping both buffer tubes completely empty during this opening step preserves the mobility required for complex swaps.

2. Deploy a Single Buffer Tube

Once direct top-to-top moves are exhausted, designate one empty tube as an active transfer station while strictly keeping the second tube vacant. Move an obstructive top segment into the active buffer only when doing so immediately exposes a color that can merge onto another column. Apply a strict "one-in, one-out" rule: do not park a segment in your working buffer unless the move directly unlocks an immediate follow-up transfer.

3. Lock In the First Solid Column

Focus your unblocking transfers on the single color closest to completion. Funnel all four matching units into one tube to permanently lock that color. Finishing this first stack eliminates a color from rotation and typically empties a column, returning your board to a safe two-buffer setup.

4. Cascade the Remaining Columns

With board capacity restored, route secondary colors into open slots to access the remaining bottom segments. As fewer colors remain active, each transfer will either complete another full stack or reveal an essential base piece. Continue shifting isolated units until all columns are sorted into solid colors.

PhaseCore TaskBuffer Tube Restriction
1. Surface ConsolidationMerge matching top layers directlyKeep both buffer tubes empty
2. Targeted UnblockingExpose buried secondary layersUse one tube for swaps; leave one empty
3. Monochromatic LockAssemble four units of your primary colorRoute all matching units into a single column
4. Cascade ResolutionUncover remaining base segments and finish stacksRotate open lanes freely to finalize matches

When to Split Paired Colors

While keeping matching segments together is standard practice, Level 36 frequently buries critical base anchors underneath pre-paired colors. Hesitating to break up a two-unit stack can stall your progress.

Split a matching pair across available space only under two conditions:

  • The move directly uncovers a buried segment needed to finish a four-unit column.
  • The exposed segment immediately transfers onto an existing stack, leaving an open slot to recombine the split units later.

Never split pairs merely to shuffle columns without an immediate transfer target.

Failure Points and Restart Signals

The most frequent mistake on Level 36 is parking three units of a single color into an empty buffer tube before locating its fourth unit. If that final piece rests trapped beneath multiple mismatched layers in another column, those three parked units remain frozen, permanently reducing your operational space.

If your transfers stall, evaluate the board before continuing:

  • If both buffer tubes contain mismatched segments and no active columns share an exposed top color, the board is deadlocked.
  • When a deadlock occurs, restart the level immediately rather than shuffling remaining units into further dead ends, and prioritize uncovering base anchors on your next attempt.
Sort Streak: Color Puzzle icon

Free Sort Streak: Color Puzzle Codes

Current active codes and how to redeem them.

View Codes
Sarah Williams

Sarah Williams

Sarah specializes in RPG and collection games, explaining team building, character growth, and beginner-friendly ways to avoid expensive early mistakes.