To clear Amaze GO! levels 1111 through 1120, dismantle the puzzle from the outside in. Every arrow requires an unobstructed straight line off the board to exit successfully. Tapping an arrow whose flight path intersects another tile causes a collision and snaps the piece back into place. Clear the outer shell of outward-pointing arrows first to create escape corridors, then untangle the cross-locked pieces at the center.
Core Rules and Collision Trajectories
Every block in Amaze GO! is locked into one of four cardinal directions: up, down, left, or right. In levels 1111 through 1120, boards are arranged into dense spatial clusters where arrows aim directly at the sides or backs of adjacent pieces.
Before tapping any piece, verify its full trajectory:
- Straight-line exit: An arrow must have an open lane entirely across the board edge. If a single tile in front of it is occupied, the arrow bounces and remains trapped.
- Closed loops and pinwheels: Many layouts feature four-way rotational deadlocks. Breaking these loops requires locating either the single arrow pointed at an open perimeter or an intermediary piece that can exit first to open a one-tile corridor.
- Tip-to-edge tracing: Visual arrow tails can create the illusion of open lanes behind them. Always trace your path from the arrow’s pointed tip forward to the border before committing a move.
Stage-by-Stage Clearing Priorities
Stages across the 1111–1120 bracket feature distinct puzzle layouts that require specific clearance orders.
| Stage Group | Grid Architecture | Primary Clearing Priority | Critical Failure Point |
|---|---|---|---|
| Levels 1111–1113 | Perimeter shells and rectangular grids | Clear outermost outbound edge arrows | Tapping inward-facing arrows that hit the core |
| Levels 1114–1116 | Opposing pairs and central T-junctions | Clear perpendicular cross-lanes first | Attempting head-to-head releases before clearing flanks |
| Levels 1117–1118 | Asymmetrical interlocking webs | Trace blockers backward from center | Tapping blindly into directional blind spots |
| Levels 1119–1120 | Dual spiral cores and dense labyrinths | Unlock spiral tails to collapse central pins | Misjudging clearance along shared interior channels |
Levels 1111–1113: Peeling Outer Perimeters
Start by scanning the extreme outer rows and columns. In Level 1111, locate the outward-pointing perimeter arrows along the top, bottom, and side edges. Tapping these strips away the protective boundary without shifting internal anchors.
Levels 1112 and 1113 alternate edge directions. Confirm that an arrow points outward away from the board before tapping, as any inward-facing edge arrow will collide with the core structure. In Level 1113, tap the four extreme corner arrows first. Removing the corners exposes the sides of the secondary ring, opening clear lines for the next layer.
Levels 1114–1116: Clearing Cross-Locks and T-Junctions
This mid-tier group introduces opposing arrows facing one another across narrow gaps. In Level 1114, two horizontal arrows face each other across a two-tile space. Neither can exit forward until the perpendicular vertical column flanking them is stripped away.
Level 1115 forms a T-junction where horizontal rows intersect a vertical spine. Clear the top of the vertical column first to give intersecting horizontal pieces room to leave the screen. Level 1116 centers on a 3x3 knot pinned from all four cardinal sides. Peel the outer frame, dismantle one side of the knot to expose an exit vector for the center arrow, and let the remaining quadrants collapse.
Levels 1117–1120: Reverse Tracing and Spiral Unwinding
Levels 1117 through 1120 feature dense, asymmetrical webs where the opening move is not immediately obvious. Instead of tapping through trial and error, use reverse path tracing:
- Locate the most deeply trapped center arrow.
- Follow its forward path to see which specific piece blocks it.
- Identify what blocks that second piece, and continue following the obstruction chain until you reach an arrow with an open line off the board.
- Tap that final perimeter piece to begin the unraveling chain.
For the dual spirals in Levels 1119 and 1120, work from the outer tail of each spiral inward toward the central hub. Avoid rapid rhythmic tapping when multiple arrows exit in sequence; pausing to re-evaluate the board after each clear prevents accidental collisions along shared corridors.
Free Amaze GO! Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
95 players commented on this guide.
The explanation is clear, especially for beginners.
This saved me time in the early game.
I wish I had read this before upgrading the wrong thing.
Good guide for Amaze GO! players. The strategy part was useful.