Block Out Level 264 Walkthrough: Step-by-Step Sorting Guide

To solve Level 264 in Block Out, completely clear one tube immediately to serve as a temporary holding buffer. Once that space is open, transfer surface pieces onto matching adjacent stacks to expose buried colors, then assemble full single-color stacks from the base upward.

Phase-by-Phase Level 264 Strategy

Level 264 features multiple color fragments spread across partially filled tubes, offering limited immediate transfer targets. Placing blocks into open spaces without uncovering matching opportunities underneath quickly clogs the board.

Use this phase plan to navigate the board from the initial scan to clearance:

Step 1: Open Your First Buffer Tube

Begin by scanning the board for the column that requires the fewest transfers to empty completely. Look for surface blocks that already have identical matching targets on neighboring columns.

1. Shift matching top blocks directly onto existing stacks of the same color.
2. Avoid moving pieces into an empty slot unless that transfer directly empties a column.
3. Once a tube is cleared to the base, keep it vacant rather than using it as general storage.

Step 2: Uncover Buried Colors

With an open buffer slot available, focus on color groups that have fragments scattered across the upper and middle layers.

Prioritize moving pieces that uncover locked colors over completing easy partial matches. If transferring one block exposes two matching base pieces beneath it, prioritize that line to unlock further moves across the board. Always ensure receiving columns have sufficient remaining capacity to hold incoming blocks before initiating a transfer.

Step 3: Anchor and Complete Single-Color Stacks

As columns begin filling with three pieces of a single color, legal move options narrow. To prevent board lockouts:

• Consolidate targeted colors into full, four-block stacks rather than leaving multiple partial columns incomplete.
• Count the remaining open slots across the board before committing a color into a new column.
• If a color sequence requires more open headroom than currently available, switch to a color line with fewer transfer steps.

Step 4: Clear the Remaining Cascade

Once three or four columns are fully sorted and locked, the remaining tubes will contain only two or three alternating colors. Use your dedicated buffer slot to hold the top piece of the final mixed column, move the exposed base piece onto its matching column, and return the buffer piece to finish the level.

Rules to Prevent Deadlocks

• Do not split merged stacks: Avoid separating matching pieces you have already combined unless doing so immediately completes another tube on the next tap.
• Check column capacity before moving: Verify that the target tube has enough room to receive the full continuous run of identical pieces you plan to shift. Leaving partial fragments stranded behind locks both columns unnecessarily.