To clear Level 14 in Bus Traffic Fever!, you must route buses into the boarding area in the exact order of the front passenger queue while keeping holding slots open. If your active dock slots fill with buses that cannot pick up the commuters currently at the front of the sidewalk line, the run ends in gridlock.
Core Rules for Level 14 Clearance
Passengers stand in a single line on the curb in distinct color groups (such as blue, red, and yellow) and only board from the front edge. A bus dispatched from the parking lot drives to an open dock slot, loads matching passengers from the front of the line until full, and then exits the screen.
To prevent an early failure:
- Match the front of the line first: Never dispatch a bus whose color only matches passengers sitting deep in the back of the queue. That bus will remain stationary in a dock slot, blocking space until the passengers ahead of its color group are cleared.
- Trace escape lanes before tapping: Identify which vehicles have completely clear exit runways before making a move.
- Use holding slots deliberately: You can park an unmatched vehicle in a dock slot only if moving it immediately opens the runway for a trapped bus that matches the current front passengers.
Three-Phase Clearing Strategy
Manage dock capacity throughout Level 14 by breaking the stage into three sequential phases.
| Phase | Primary Objective | Risk to Avoid | Recommended Action |
|---|---|---|---|
| Opening | Clear the immediate front commuters | Dock saturation with idle buses | Dispatch only vehicles that have an open path and match the front line. |
| Mid-Game | Free trapped matching colors | Using multiple bays for non-matching buses | Move one obstructing bus to open a lane, then immediately pull the freed match. |
| Endgame | Clear remaining passenger clusters | Pulling surplus buses of the same color | Count remaining passengers to avoid dispatching buses that cannot be fully loaded. |
Managing Mid-Stage Choke Points
The primary failure point in Level 14 occurs when the queue transitions between major color sets and the matching buses are barricaded behind cross-traffic lanes.
Maintain a strict one-slot buffer during this transition:
- Tap the obstructing bus to move it into an empty dock slot.
- Immediately tap the newly cleared bus behind it that matches the front passenger group.
- Allow the matched bus to load its full capacity and exit the screen before tapping any other vehicles.
Every departing bus restores a free slot to your dock. Sticking to this one-in, one-out rhythm prevents the board from filling with unfillable vehicles.
Endgame Evacuation
Once the dense parking layout is unlocked, open lanes will be available for all remaining buses. However, miscounting remaining passengers can still cause a late-stage failure.
Before tapping the final vehicles, check the exact size of the remaining passenger line. Do not pull two buses of the same color if only enough passengers remain to fill one. An incompletely filled bus cannot leave the dock, which permanently reduces your available holding space. Feed the final buses into the boarding curb one at a time until the sidewalk queue is empty and the level-clear screen appears.
Free Bus Traffic Fever! Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
95 players commented on this guide.
Good guide for Bus Traffic Fever! players. The strategy part was useful.
This saved me time in the early game.
The tips are practical and easy to follow.
This helped me understand strategy much better.