To beat Level 264 in Parking Loop, release all unblocked perimeter vehicles first to create an evenly spaced traffic flow on the circular track. Once the outer loop is moving predictably, clear the front cars in tandem bays, and then time the release of the rear and interior vehicles into the gaps between passing cars. Rapidly tapping adjacent vehicles causes merge-point collisions and immediately fails the stage.
Level 264 Step-by-Step Release Order
Clearing Level 264 requires an outside-in approach. Because cars maintain a constant speed once they enter the loop, your initial releases dictate how much room you have to merge trapped vehicles later.
- Clear unobstructed perimeter stalls first: Tap the front-line perimeter cars that have a direct, unblocked path to the track. Start with the stall closest to the primary curve and work outward. Leave a slight pause between each tap to ensure the cars circulate with a steady buffer of at least one car-length between them.
- Release lead vehicles in tandem stalls: Once perimeter traffic is circulating, identify tandem stalls where one vehicle blocks another. Tap the front vehicle only when a gap of at least one car-length approaches the stall opening.
- Wait for a track cycle before tapping the rear vehicle: Do not tap the trailing car immediately after the front car departs. Let the track cycle through at least half a rotation until a clear gap aligns with the stall, then launch the secondary vehicle.
- Empty the central stalls one by one: After the outer and tandem rows are cleared, merge the interior cars. Tap each interior car just as the rear bumper of a circulating vehicle passes the stall's merge point, allowing the car to slide into the trailing gap safely.
Avoiding Common Merge Collisions
The circular track on Level 264 has a tight turning radius, which drastically narrows safe merge windows once multiple cars are in motion. Use the adjustments below to address the most frequent failure points.
| Failure Point | Direct Cause | Corrective Action |
|---|---|---|
| Tandem Rear-End Crash | Tapping the back car right behind the front car | Wait for the circulating track to rotate and open a fresh gap before discharging the second vehicle. |
| Corner Clipping | Merging an interior car as traffic enters the curve | Tap the car only after the passing vehicle clears the curve apex, merging directly behind it. |
| Track Overcrowding | Launching too many perimeter cars in a rapid burst | Stagger initial taps to guarantee at least one car-length of buffer space between all active vehicles. |
| Gridlock at the Merge Junction | Attempting to clear center stalls before outer lanes | Clear outer stalls first to open visual space and establish the loop's rotation rhythm. |
Free Parking Loop Codes
Current active codes and how to redeem them.
COMMUNITY
Player Comments
111 players commented on this guide.
This guide answered the exact question I had.
Good guide for Parking Loop players. The strategy part was useful.
The explanation is clear, especially for beginners.
The tips are practical and easy to follow.