To beat Level 358 in Parking Loop, clear the unobstructed single-car perimeter stalls first, launch the lead vehicles from stacked tandem bays into open gaps, and finish by releasing the rear tandem cars and inner bays. Because vehicles accelerate immediately upon tapping, success depends on feeding cars into open lane pockets without causing merge collisions.

Clearance Order by Stall Phase

Emptying the lot from the outside inward establishes steady traffic flow and prevents gridlock on the central one-way transit ring. Follow this three-phase clearance order:

Clearance PhaseTarget Stalls and VehiclesPrimary ObjectiveKey Risk
Phase 1: Perimeter OutersDirect-facing perimeter stalls with single carsEmpty outer bays to establish baseline traffic flow toward the exitMerging back-to-back cars without adequate spacing
Phase 2: Tandem LeadsForward blocking vehicles in stacked dual stallsUnblock rear vehicles while filtering into active loop gapsReleasing while circulating loop traffic passes the stall nose
Phase 3: Interior Bays and Rear TandemsTrapped rear vehicles and acute-angle inner stallsDrain remaining tight bays into an uncrowded loopLaunching rear cars before the lead vehicle finishes its turn

Once Phase 1 cars clear the loop and exit the board, traffic density drops substantially. This creates reliable entry gaps for pulling the forward vehicles out of tandem stalls during Phase 2.

Merge Gap Timing and Spacing Rules

Launching a car into an occupied lane segment causes an instant collision and resets the stage. Manage your merge timing with these release rules:

  • Wait for the rear axle: Do not tap a car the moment an oncoming vehicle clears the stall's nose. Vehicles require a brief fraction of a second to pivot into the main lane, so tapping too early clips the passing car's rear bumper. Wait until the oncoming vehicle's rear axle has completely crossed the stall threshold before releasing.
  • Alternate opposing sides: Avoid tapping adjacent stalls in rapid succession. Neighboring cars close trailing distances too quickly, triggering rear-end collisions. Instead, alternate releases between opposing sides of the track to stagger entries across the loop's circumference.
  • Double headway for long chassis: Longer vehicles take longer to clear the turning arc. Wait for a completely clear lane segment before deploying a long-wheelbase car from an interior bay.

Handling Tandem Stalls

Stacked tandem bays represent the primary bottleneck on Level 358. Rear vehicles remain physically blocked until the forward car vacates the bay, but they must not be launched immediately behind the leader.

  1. Tap the forward vehicle when an open gap appears in the transit ring.
  2. Hold the rear vehicle in place while the lead car enters the loop, completes its pivot turn, and reaches full straight-line speed.
  3. Check upstream for approaching loop traffic rounding the preceding curve.
  4. Tap the rear vehicle only after any inbound loop traffic passes, slotting the car cleanly into the following gap.

If multiple merges cause traffic to bunch up on the main circuit, stop tapping entirely. Because all circulating vehicles continuously move toward the exit gate, pausing for several seconds clears the loop and restores safe entry gaps.

Parking Loop icon

Free Parking Loop Codes

Current active codes and how to redeem them.

View Codes
Michael Smith

Michael Smith

Michael covers live-service games, events, reward systems, and efficient daily routines, turning frequent updates into clear actions for players.