To clear Level 245 in Bus Traffic Fever!, dispatch vehicles only when their color matches the passengers at the front of the queue, rather than clearing every unblocked bus on sight. The puzzle provides limited loading dock bays. Parking an unmatched bus in an active loading slot stalls boarding and risks gridlock. Reserve empty bays exclusively for vehicles that immediately clear a path to a required bus.

Managing Dock Space and Passenger Queue Alignment

Passengers arrive at the boarding platform in fixed, color-coded lines. When a dispatched bus reaches an open loading dock, matching passengers board one by one until the vehicle reaches capacity. A fully loaded bus exits immediately, reopening that bay for the next vehicle.

If you send a bus whose color does not match the active front passengers, that bus cannot board riders. It sits idle in the dock slot, reducing your available holding capacity. To maintain turnover:

  • Inspect the front queue first: Check the leading three to five passengers before selecting a bus from the parking grid.
  • Match perimeter exits directly: Tap only outer buses that correspond to the active queue color so they load and leave immediately.
  • Count passenger capacity: If a bus holds four passengers but the front group only has two, do not dispatch a second bus of that color until the queue advances.
  • Hold unneeded perimeter buses: Leave unblocked, non-matching buses in their parking spaces until their passenger color reaches the front.
Action StateDock ImpactPriorityTactical Decision
Direct Color MatchLoads immediately and clears bayHighDispatch to advance queue and free dock space
Path-Unblocking VehicleConsumes one dock bay temporarilyMediumDispatch only if it exposes an active match
Idle Perimeter BusBlocks bay without boarding ridersLowHold in parking grid until passenger queue shifts
Trapped Interior BusNo dock impact until lane opensTargetClear blocking vehicles systematically

Step-by-Step Clearing Sequence

Level 245 features horizontal buses cross-parked over vertical exit lanes. Clearing the stage requires a three-phase approach that systematically opens these blocked lanes without filling the loading dock.

Phase 1: Clear Matching Perimeter Buses

Begin by identifying the leading passenger color in line. Find outer-edge buses of that exact color with unobstructed exit paths. Dispatch these vehicles first. They will board their passengers and exit right away, clearing outer lanes while keeping your dock bays open.

Phase 2: Remove Horizontal Lane Blockers

Identify the horizontal buses trapping vertical lanes that contain active passenger colors. Sacrifice a single dock bay to pull out a horizontal blocker only when doing so immediately allows one or two newly freed buses to match the front queue. Once those vertical buses exit and load their passengers, the passenger queue will cycle forward to match the bus held in reserve.

Phase 3: Flush the Remaining Interior Lanes

Once the central grid is untangled, remaining vehicles have straight paths to the exit road. Dispatch the final buses in exact sequence with the remaining passenger groups. Avoid tapping multiple buses at once; let each vehicle pull into the dock and fill before sending the next one to prevent accidental terminal lockup.

Bus Traffic Fever! icon

Free Bus Traffic Fever! Codes

Current active codes and how to redeem them.

View Codes
James Brown

James Brown

James focuses on Android gaming on PC, emulator setup, controls, performance tuning, and practical troubleshooting for longer play sessions.